18 Led
2017
18 Led
'17
16:54
Dear Knot DNS users,
CZ.NIC is proud to release the 2.4.0 release of Knot DNS. This release
contains many improvements over 2.3.x release of Knot DNS.
The Knot DNS 2.4.x is the new stable branch. Starting from this release
we are going to support current stable (2.4.x) and previous stable (2.3.x)
branches, and at the same time we are deprecating previous Knot DNS 1.6.x
release.
Now the new features we are so excited about!
* We have a new journal to store zone changes, it's key features are:
- all journals for all zones are in a single LMDB database
(defaults to storage/journal; 1G size)
- the occupied space is measured per zone
- old changesets get preserved after zone flush until we run out of space
- if zone flushing is disabled and journal gets full, it tries to free up
space by merging older changesets
- all changes are done by transactions, resulting in always-consistent DB
(but some mutexes still necessary for opening DB && for keeping zone
contents consistent with journal)
- kjournalprint provides a way to list zones in journal
- old journal is automatically imported, but the configuration needs to be
updated manually
* Thanks to qp-trie (originally proposed by Tony Finch) adapted to Knot DNS
we have much lower memory consumption when Knot DNS is used with many
zones
* The zone timers and zone events have been refactored and improved
* The SOA query and transfer now shares the TCP connection
* There's a new statistics module for traffic measurements
There are also several other bugfixes and improvements related to transfers,
timers and other areas.
And that's it! Thank you for using Knot DNS. And we are really looking
forward to your feedback.
Full changelog:
https://gitlab.labs.nic.cz/labs/knot/raw/v2.4.0/NEWS
Sources:
https://secure.nic.cz/files/knot-dns/knot-2.4.0.tar.xz
GPG signature:
https://secure.nic.cz/files/knot-dns/knot-2.4.0.tar.xz.asc
Documentation:
https://www.knot-dns.cz/docs/2.x/html/
--
Ondřej Surý -- Technical Fellow
--------------------------------------------
CZ.NIC, z.s.p.o. -- Laboratoře CZ.NIC
Milesovska 5, 130 00 Praha 3, Czech Republic
mailto:ondrej.sury@nic.cz https://nic.cz/
--------------------------------------------
19 Led
19 Led
11:16
On 18/01/2017 16:54, Ondřej Surý wrote:
Good morning Ondrej,
CZ.NIC is proud to release the 2.4.0 release of Knot
DNS. This release
contains many improvements over 2.3.x release of Knot DNS.
Thank you and your team for this release! It has some very nice
improvements (such as improved timers and TCP connection re-use, which I
am happy about).
I now have an internal package of it, and it's running on one of our
test servers. I'll be sure to provide feedback and/or open bug reports soon.
Regards,
Anand
14:03
Hello Ondřej,
First of all, thank you and everyone at CZ.NIC for the great work you do
on Knot. We've been using it for a while now without issues, and
recently moved up to version 2 which was mostly painless.
Up until Knot 2.3.2 I've had no trouble compiling on our CentOS 6 build
server to distribute via an internal yum repo. When I tried to compile
2.4.0, however, I ran into the following error:
make[3]: Entering directory `/home/rpmbuild/rpmbuild/BUILD/knot-2.4.0/src'
CC knot/conf/libknotd_la-base.lo
In file included from knot/conf/base.c:23:
./knot/nameserver/query_module.h: In function ‘mod_ctr_incr’:
./knot/nameserver/query_module.h:136: warning: implicit declaration of
function ‘__atomic_add_fetch’
./knot/nameserver/query_module.h:136: error: ‘__ATOMIC_RELAXED’
undeclared (first use in this function)
./knot/nameserver/query_module.h:136: error: (Each undeclared identifier
is reported only once
./knot/nameserver/query_module.h:136: error: for each function it
appears in.)
./knot/nameserver/query_module.h: In function ‘mod_ctr_decr’:
./knot/nameserver/query_module.h:144: warning: implicit declaration of
function ‘__atomic_sub_fetch’
./knot/nameserver/query_module.h:144: error: ‘__ATOMIC_RELAXED’
undeclared (first use in this function)
./knot/nameserver/query_module.h: In function ‘mod_ctrs_incr’:
./knot/nameserver/query_module.h:154: error: ‘__ATOMIC_RELAXED’
undeclared (first use in this function)
./knot/nameserver/query_module.h: In function ‘mod_ctrs_decr’:
./knot/nameserver/query_module.h:167: error: ‘__ATOMIC_RELAXED’
undeclared (first use in this function)
As far as I can tell, and please correct me if I'm wrong, this is due to
using an outdated version of GCC (4.4.7), which is the latest available
on the epel repository for CentOS 6. We saw no issues building on our
CentOS 7 build machine, where a more recent version of GCC is available
from the epel repo.
Is this expected?
Thanks, best regards.
- Gonzalo
On 18/01/17 12:54, Ondřej Surý wrote:
Dear Knot DNS users,
CZ.NIC is proud to release the 2.4.0 release of Knot DNS. This release
contains many improvements over 2.3.x release of Knot DNS.
The Knot DNS 2.4.x is the new stable branch. Starting from this release
we are going to support current stable (2.4.x) and previous stable (2.3.x)
branches, and at the same time we are deprecating previous Knot DNS 1.6.x
release.
Now the new features we are so excited about!
* We have a new journal to store zone changes, it's key features are:
- all journals for all zones are in a single LMDB database
(defaults to storage/journal; 1G size)
- the occupied space is measured per zone
- old changesets get preserved after zone flush until we run out of space
- if zone flushing is disabled and journal gets full, it tries to free up
space by merging older changesets
- all changes are done by transactions, resulting in always-consistent DB
(but some mutexes still necessary for opening DB && for keeping zone
contents consistent with journal)
- kjournalprint provides a way to list zones in journal
- old journal is automatically imported, but the configuration needs to be
updated manually
* Thanks to qp-trie (originally proposed by Tony Finch) adapted to Knot DNS
we have much lower memory consumption when Knot DNS is used with many
zones
* The zone timers and zone events have been refactored and improved
* The SOA query and transfer now shares the TCP connection
* There's a new statistics module for traffic measurements
There are also several other bugfixes and improvements related to transfers,
timers and other areas.
And that's it! Thank you for using Knot DNS. And we are really looking
forward to your feedback.
Full changelog:
https://gitlab.labs.nic.cz/labs/knot/raw/v2.4.0/NEWS
Sources:
https://secure.nic.cz/files/knot-dns/knot-2.4.0.tar.xz
GPG signature:
https://secure.nic.cz/files/knot-dns/knot-2.4.0.tar.xz.asc
Documentation:
https://www.knot-dns.cz/docs/2.x/html/
--
Ondřej Surý -- Technical Fellow
--------------------------------------------
CZ.NIC, z.s.p.o. -- Laboratoře CZ.NIC
Milesovska 5, 130 00 Praha 3, Czech Republic
mailto:ondrej.sury@nic.cz https://nic.cz/
--------------------------------------------
_______________________________________________
knot-dns-users mailing list
knot-dns-users(a)lists.nic.cz
https://lists.nic.cz/cgi-bin/mailman/listinfo/knot-dns-users
14:16
Hello Gonzalo,
we are pleased to hear any feedback from our users :)
Yes, exactly, Knot DNS 2.4.0 uses compiler features not present in GCC 4.4.
Maybe it would be better to migrate your server to newer system (e.g.
CentOS 7). If you really need to compile Knot DNS 2.4.0 on CentOS 6,
probably installing Cern Developer Toolset 2.0 (devtoolset-2), which
brings GCC 4.8, solves your problem. It needs to get familiar with
first, but it is a good tool anyway. Please let us know if it helps you.
Have a wonderful day,
Libor
Dne 19.1.2017 v 14:03 Gonzalo Muñoz napsal(a):
Hello Ondřej,
First of all, thank you and everyone at CZ.NIC for the great work you do
on Knot. We've been using it for a while now without issues, and
recently moved up to version 2 which was mostly painless.
Up until Knot 2.3.2 I've had no trouble compiling on our CentOS 6 build
server to distribute via an internal yum repo. When I tried to compile
2.4.0, however, I ran into the following error:
make[3]: Entering directory `/home/rpmbuild/rpmbuild/BUILD/knot-2.4.0/src'
CC knot/conf/libknotd_la-base.lo
In file included from knot/conf/base.c:23:
./knot/nameserver/query_module.h: In function ‘mod_ctr_incr’:
./knot/nameserver/query_module.h:136: warning: implicit declaration of
function ‘__atomic_add_fetch’
./knot/nameserver/query_module.h:136: error: ‘__ATOMIC_RELAXED’
undeclared (first use in this function)
./knot/nameserver/query_module.h:136: error: (Each undeclared identifier
is reported only once
./knot/nameserver/query_module.h:136: error: for each function it
appears in.)
./knot/nameserver/query_module.h: In function ‘mod_ctr_decr’:
./knot/nameserver/query_module.h:144: warning: implicit declaration of
function ‘__atomic_sub_fetch’
./knot/nameserver/query_module.h:144: error: ‘__ATOMIC_RELAXED’
undeclared (first use in this function)
./knot/nameserver/query_module.h: In function ‘mod_ctrs_incr’:
./knot/nameserver/query_module.h:154: error: ‘__ATOMIC_RELAXED’
undeclared (first use in this function)
./knot/nameserver/query_module.h: In function ‘mod_ctrs_decr’:
./knot/nameserver/query_module.h:167: error: ‘__ATOMIC_RELAXED’
undeclared (first use in this function)
As far as I can tell, and please correct me if I'm wrong, this is due to
using an outdated version of GCC (4.4.7), which is the latest available
on the epel repository for CentOS 6. We saw no issues building on our
CentOS 7 build machine, where a more recent version of GCC is available
from the epel repo.
Is this expected?
Thanks, best regards.
- Gonzalo
On 18/01/17 12:54, Ondřej Surý wrote:
Dear Knot DNS users,
CZ.NIC is proud to release the 2.4.0 release of Knot DNS. This release
contains many improvements over 2.3.x release of Knot DNS.
The Knot DNS 2.4.x is the new stable branch. Starting from this release
we are going to support current stable (2.4.x) and previous stable (2.3.x)
branches, and at the same time we are deprecating previous Knot DNS 1.6.x
release.
Now the new features we are so excited about!
* We have a new journal to store zone changes, it's key features are:
- all journals for all zones are in a single LMDB database
(defaults to storage/journal; 1G size)
- the occupied space is measured per zone
- old changesets get preserved after zone flush until we run out of space
- if zone flushing is disabled and journal gets full, it tries to free up
space by merging older changesets
- all changes are done by transactions, resulting in always-consistent DB
(but some mutexes still necessary for opening DB && for keeping zone
contents consistent with journal)
- kjournalprint provides a way to list zones in journal
- old journal is automatically imported, but the configuration needs to be
updated manually
* Thanks to qp-trie (originally proposed by Tony Finch) adapted to Knot DNS
we have much lower memory consumption when Knot DNS is used with many
zones
* The zone timers and zone events have been refactored and improved
* The SOA query and transfer now shares the TCP connection
* There's a new statistics module for traffic measurements
There are also several other bugfixes and improvements related to transfers,
timers and other areas.
And that's it! Thank you for using Knot DNS. And we are really looking
forward to your feedback.
Full changelog:
https://gitlab.labs.nic.cz/labs/knot/raw/v2.4.0/NEWS
Sources:
https://secure.nic.cz/files/knot-dns/knot-2.4.0.tar.xz
GPG signature:
https://secure.nic.cz/files/knot-dns/knot-2.4.0.tar.xz.asc
Documentation:
https://www.knot-dns.cz/docs/2.x/html/
--
Ondřej Surý -- Technical Fellow
--------------------------------------------
CZ.NIC, z.s.p.o. -- Laboratoře CZ.NIC
Milesovska 5, 130 00 Praha 3, Czech Republic
mailto:ondrej.sury@nic.cz https://nic.cz/
--------------------------------------------
_______________________________________________
knot-dns-users mailing list
knot-dns-users(a)lists.nic.cz
https://lists.nic.cz/cgi-bin/mailman/listinfo/knot-dns-users
_______________________________________________
knot-dns-users mailing list
knot-dns-users(a)lists.nic.cz
https://lists.nic.cz/cgi-bin/mailman/listinfo/knot-dns-users
15:26
On 19/01/2017 14:16, Libor Peltan wrote:
Hi Gonzalo,
I would support Libor's suggestion. While it's possible to compile Knot
2.x on CentOS 6, it just runs better on CentOS 7. For example, we
discovered that under CentOS 6, we had to disable recvmmsg() in Knot.
Even though recvmmsg() has been backported into the CentOS 6 kernel, it
does not work so well.
Regards,
Anand
Hello Gonzalo,
we are pleased to hear any feedback from our users :)
Yes, exactly, Knot DNS 2.4.0 uses compiler features not present in GCC 4.4.
Maybe it would be better to migrate your server to newer system (e.g.
CentOS 7). If you really need to compile Knot DNS 2.4.0 on CentOS 6,
probably installing Cern Developer Toolset 2.0 (devtoolset-2), which
brings GCC 4.8, solves your problem. It needs to get familiar with
first, but it is a good tool anyway. Please let us know if it helps you.
Have a wonderful day,
Libor
16:32
After some trial and error I was able to compile Knot 2.4.0 for CentOS 6
using devtoolset-2.
We're in the process of updating our systems though, which I agree is
the better solution going forward.
Thank you Libor and Anand for your feedback.
- Gonzalo
On 19/01/17 10:16, Libor Peltan wrote:
Hello Gonzalo,
we are pleased to hear any feedback from our users :)
Yes, exactly, Knot DNS 2.4.0 uses compiler features not present in GCC 4.4.
Maybe it would be better to migrate your server to newer system (e.g.
CentOS 7). If you really need to compile Knot DNS 2.4.0 on CentOS 6,
probably installing Cern Developer Toolset 2.0 (devtoolset-2), which
brings GCC 4.8, solves your problem. It needs to get familiar with
first, but it is a good tool anyway. Please let us know if it helps you.
Have a wonderful day,
Libor
Dne 19.1.2017 v 14:03 Gonzalo Muñoz napsal(a):
Hello Ondřej,
First of all, thank you and everyone at CZ.NIC for the great work you do
on Knot. We've been using it for a while now without issues, and
recently moved up to version 2 which was mostly painless.
Up until Knot 2.3.2 I've had no trouble compiling on our CentOS 6 build
server to distribute via an internal yum repo. When I tried to compile
2.4.0, however, I ran into the following error:
make[3]: Entering directory
`/home/rpmbuild/rpmbuild/BUILD/knot-2.4.0/src'
CC knot/conf/libknotd_la-base.lo
In file included from knot/conf/base.c:23:
./knot/nameserver/query_module.h: In function ‘mod_ctr_incr’:
./knot/nameserver/query_module.h:136: warning: implicit declaration of
function ‘__atomic_add_fetch’
./knot/nameserver/query_module.h:136: error: ‘__ATOMIC_RELAXED’
undeclared (first use in this function)
./knot/nameserver/query_module.h:136: error: (Each undeclared identifier
is reported only once
./knot/nameserver/query_module.h:136: error: for each function it
appears in.)
./knot/nameserver/query_module.h: In function ‘mod_ctr_decr’:
./knot/nameserver/query_module.h:144: warning: implicit declaration of
function ‘__atomic_sub_fetch’
./knot/nameserver/query_module.h:144: error: ‘__ATOMIC_RELAXED’
undeclared (first use in this function)
./knot/nameserver/query_module.h: In function ‘mod_ctrs_incr’:
./knot/nameserver/query_module.h:154: error: ‘__ATOMIC_RELAXED’
undeclared (first use in this function)
./knot/nameserver/query_module.h: In function ‘mod_ctrs_decr’:
./knot/nameserver/query_module.h:167: error: ‘__ATOMIC_RELAXED’
undeclared (first use in this function)
As far as I can tell, and please correct me if I'm wrong, this is due to
using an outdated version of GCC (4.4.7), which is the latest available
on the epel repository for CentOS 6. We saw no issues building on our
CentOS 7 build machine, where a more recent version of GCC is available
from the epel repo.
Is this expected?
Thanks, best regards.
- Gonzalo
On 18/01/17 12:54, Ondřej Surý wrote:
_______________________________________________
knot-dns-users mailing list
knot-dns-users(a)lists.nic.cz
https://lists.nic.cz/cgi-bin/mailman/listinfo/knot-dns-users Dear Knot DNS users,
CZ.NIC is proud to release the 2.4.0 release of Knot DNS. This release
contains many improvements over 2.3.x release of Knot DNS.
The Knot DNS 2.4.x is the new stable branch. Starting from this release
we are going to support current stable (2.4.x) and previous stable
(2.3.x)
branches, and at the same time we are deprecating previous Knot DNS
1.6.x
release.
Now the new features we are so excited about!
* We have a new journal to store zone changes, it's key features are:
- all journals for all zones are in a single LMDB database
(defaults to storage/journal; 1G size)
- the occupied space is measured per zone
- old changesets get preserved after zone flush until we run out of
space
- if zone flushing is disabled and journal gets full, it tries to
free up
space by merging older changesets
- all changes are done by transactions, resulting in
always-consistent DB
(but some mutexes still necessary for opening DB && for keeping zone
contents consistent with journal)
- kjournalprint provides a way to list zones in journal
- old journal is automatically imported, but the configuration
needs to be
updated manually
* Thanks to qp-trie (originally proposed by Tony Finch) adapted to
Knot DNS
we have much lower memory consumption when Knot DNS is used with many
zones
* The zone timers and zone events have been refactored and improved
* The SOA query and transfer now shares the TCP connection
* There's a new statistics module for traffic measurements
There are also several other bugfixes and improvements related to
transfers,
timers and other areas.
And that's it! Thank you for using Knot DNS. And we are really looking
forward to your feedback.
Full changelog:
https://gitlab.labs.nic.cz/labs/knot/raw/v2.4.0/NEWS
Sources:
https://secure.nic.cz/files/knot-dns/knot-2.4.0.tar.xz
GPG signature:
https://secure.nic.cz/files/knot-dns/knot-2.4.0.tar.xz.asc
Documentation:
https://www.knot-dns.cz/docs/2.x/html/
--
Ondřej Surý -- Technical Fellow
--------------------------------------------
CZ.NIC, z.s.p.o. -- Laboratoře CZ.NIC
Milesovska 5, 130 00 Praha 3, Czech Republic
mailto:ondrej.sury@nic.cz https://nic.cz/
--------------------------------------------
_______________________________________________
knot-dns-users mailing list
knot-dns-users(a)lists.nic.cz
https://lists.nic.cz/cgi-bin/mailman/listinfo/knot-dns-users
_______________________________________________
knot-dns-users mailing list
knot-dns-users(a)lists.nic.cz
https://lists.nic.cz/cgi-bin/mailman/listinfo/knot-dns-users 
20 Led
20 Led
20:02
Libor Peltan wrote:
Hello Gonzalo,
we are pleased to hear any feedback from our users :)
Yes, exactly, Knot DNS 2.4.0 uses compiler features not present in GCC 4.4.
Maybe it would be better to migrate your server to newer system (e.g. CentOS
7). If you really need to compile Knot DNS 2.4.0 on CentOS 6, probably
installing Cern Developer Toolset 2.0 (devtoolset-2), which brings GCC 4.8,
solves your problem. It needs to get familiar with first, but it is a good
tool anyway. Please let us know if it helps you.
Have a wonderful day,
Libor
It looks like Cern Developer Toolset is a rebuild of the Red Hat
Developer Toolset. There is also a CentOS group that rebuilds the
devtoolset:
https://www.softwarecollections.org/en/scls/rhscl/devtoolset-4/
This one has a slightly newer gcc 5.x.
I also see an even newer devtoolset with gcc 6.x on the CentOS mirror
but I'm not sure if it's been released yet:
http://mirror.centos.org/centos/6/sclo/x86_64/rh/devtoolset-6/
--
Robert Edmonds
edmonds(a)debian.org
2809
days inactive
2811
days old
6 comments
5 participants
participants (5)
-
Anand Buddhdev -
Gonzalo Muñoz -
Libor Peltan -
Ondřej Surý -
Robert Edmonds