5 Srp
2009
5 Srp
'09
15:59
Hi all,
bit of a beginners question just installing fred using fred-manager. Installed all
neccessary packages now going to run fred get the following
./root/bin/fred-client
/tmp/root/lib/python2.6/site-packages/fred/session_base.py:649: DeprecationWarning:
os.popen3 is deprecated. Use the subprocess module.
pipes = os.popen3(self._external_validator)
FredClient 2.1.2
Type "help", "license" or "credits" for more information.
Using configuration from /tmp/root/etc/fred/fred-client.conf
Connecting to localhost, port 22351 ...
ERROR: I cannot connect to the server localhost.
Connection socket.error: [Errno 111] Connection refused (localhost:22351)
not sure if this is just a typical error from an incorrect ssl certificate or something
else,
thanks
5 Srp
5 Srp
16:32
did port 22351 open?
# netstat -tuanp | grep 22531
if i'm not mistaken fred-client connects to port 700
2009/8/5 Broadstocks <broadstock(a)iinet.net.au>
Hi all,
bit of a beginners question just installing fred using fred-manager.
Installed all neccessary packages now going to run fred get the following
./root/bin/fred-client
/tmp/root/lib/python2.6/site-packages/fred/session_base.py:649:
DeprecationWarning: os.popen3 is deprecated. Use the subprocess module.
pipes = os.popen3(self._external_validator)
FredClient 2.1.2
Type "help", "license" or "credits" for more information.
Using configuration from /tmp/root/etc/fred/fred-client.conf
Connecting to localhost, port 22351 ...
ERROR: I cannot connect to the server localhost.
Connection socket.error: [Errno 111] Connection refused (localhost:22351)
not sure if this is just a typical error from an incorrect ssl certificate
or something else,
thanks
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
--
Regards,
Umarzuki Mochlis
http://gameornot.net
17:19
Hi, no it didn't open dunno why it was set at 22531, tried 700 not working either
I think its trouble to do with omniorb name server not running properly so it thinks there
is no service running to connect to.
when i start the server omniorb nameserver will initialize fine but when I use the
/usr/sbin/invoke-rc.d omniorb4-nameserver start from documentation I get a fail:S
----- Original Message -----
From: Umarzuki Mochlis
To: A mailing list for users and developers of FRED registry system
Sent: Thursday, August 06, 2009 12:32 AM
Subject: Re: fred installation trouble
did port 22351 open?
# netstat -tuanp | grep 22531
if i'm not mistaken fred-client connects to port 700
2009/8/5 Broadstocks <broadstock(a)iinet.net.au>
Hi all,
bit of a beginners question just installing fred using fred-manager. Installed all
neccessary packages now going to run fred get the following
./root/bin/fred-client
/tmp/root/lib/python2.6/site-packages/fred/session_base.py:649: DeprecationWarning:
os.popen3 is deprecated. Use the subprocess module.
pipes = os.popen3(self._external_validator)
FredClient 2.1.2
Type "help", "license" or "credits" for more
information.
Using configuration from /tmp/root/etc/fred/fred-client.conf
Connecting to localhost, port 22351 ...
ERROR: I cannot connect to the server localhost.
Connection socket.error: [Errno 111] Connection refused (localhost:22351)
not sure if this is just a typical error from an incorrect ssl certificate or
something else,
thanks
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
--
Regards,
Umarzuki Mochlis
http://gameornot.net
------------------------------------------------------------------------------
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.44/2282 - Release Date: 08/04/09 18:01:00
17:45
you have to start the service in sequence. Check the manual.
2009/8/5 Broadstocks <broadstock(a)iinet.net.au>
Hi, no it didn't open dunno why it was set at
22531, tried 700 not
working either
I think its trouble to do with omniorb name server not running properly so
it thinks there is no service running to connect to.
when i start the server omniorb nameserver will initialize fine but when I
use the
/usr/sbin/invoke-rc.d omniorb4-nameserver start from documentation I get a
fail:S
----- Original Message -----
*From:* Umarzuki Mochlis <umarzuki(a)gmail.com>
*To:* A mailing list for users and developers of FRED registry
system<fred-users(a)lists.nic.cz>
*Sent:* Thursday, August 06, 2009 12:32 AM
*Subject:* Re: fred installation trouble
did port 22351 open?
# netstat -tuanp | grep 22531
if i'm not mistaken fred-client connects to port 700
2009/8/5 Broadstocks <broadstock(a)iinet.net.au>
--
Regards,
Umarzuki Mochlis
http://gameornot.net
Hi all,
bit of a beginners question just installing fred using fred-manager.
Installed all neccessary packages now going to run fred get the following
./root/bin/fred-client
/tmp/root/lib/python2.6/site-packages/fred/session_base.py:649:
DeprecationWarning: os.popen3 is deprecated. Use the subprocess module.
pipes = os.popen3(self._external_validator)
FredClient 2.1.2
Type "help", "license" or "credits" for more information.
Using configuration from /tmp/root/etc/fred/fred-client.conf
Connecting to localhost, port 22351 ...
ERROR: I cannot connect to the server localhost.
Connection socket.error: [Errno 111] Connection refused (localhost:22351)
not sure if this is just a typical error from an incorrect ssl certificate
or something else,
thanks
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
--
Regards,
Umarzuki Mochlis
http://gameornot.net
------------------------------
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.44/2282 - Release Date: 08/04/09
18:01:00
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
8 Srp
8 Srp
12:49
New subject: Fred Omniorb Problem
Having trouble getting the omniorb nameserver to start
even when I initialize things in order , and get to
/usr/sbin/invoke-rc.d omniorb4-nameserver start , it gives me FAIL
getting error
Error when generating zone: Is nameservice running?
(CORBA.TRANSIENT(omniORB.TRANSIENT_ConnectFailed, CORBA.COMPLETED_NO))
Exception AttributeError: "'Zone' object has no attribute
'zonedata'" in <bound method Zone.__del__ of <pyfred.zone.Zone object
at 0x9279e6c>> ignored
anyone know what causing this, as far as I can tell it doesn't look like omniorb is
setup properly , used netstat -pant to check LISTEN state and it seemed. Any idea's?
run into same problem when using fred-manager method too
thanks
----- Original Message -----
From: Umarzuki Mochlis
To: A mailing list for users and developers of FRED registry system
Sent: Thursday, August 06, 2009 1:45 AM
Subject: Re: fred installation trouble
you have to start the service in sequence. Check the manual.
2009/8/5 Broadstocks <broadstock(a)iinet.net.au>
Hi, no it didn't open dunno why it was set at 22531, tried 700 not working either
I think its trouble to do with omniorb name server not running properly so it thinks
there is no service running to connect to.
when i start the server omniorb nameserver will initialize fine but when I use the
/usr/sbin/invoke-rc.d omniorb4-nameserver start from documentation I get a fail:S
----- Original Message -----
From: Umarzuki Mochlis
To: A mailing list for users and developers of FRED registry system
Sent: Thursday, August 06, 2009 12:32 AM
Subject: Re: fred installation trouble
did port 22351 open?
# netstat -tuanp | grep 22531
if i'm not mistaken fred-client connects to port 700
2009/8/5 Broadstocks <broadstock(a)iinet.net.au>
Hi all,
bit of a beginners question just installing fred using fred-manager. Installed all
neccessary packages now going to run fred get the following
./root/bin/fred-client
/tmp/root/lib/python2.6/site-packages/fred/session_base.py:649:
DeprecationWarning: os.popen3 is deprecated. Use the subprocess module.
pipes = os.popen3(self._external_validator)
FredClient 2.1.2
Type "help", "license" or "credits" for more
information.
Using configuration from /tmp/root/etc/fred/fred-client.conf
Connecting to localhost, port 22351 ...
ERROR: I cannot connect to the server localhost.
Connection socket.error: [Errno 111] Connection refused (localhost:22351)
not sure if this is just a typical error from an incorrect ssl certificate or
something else,
thanks
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
--
Regards,
Umarzuki Mochlis
http://gameornot.net
--------------------------------------------------------------------------
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
--------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.44/2282 - Release Date: 08/04/09 18:01:00
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
--
Regards,
Umarzuki Mochlis
http://gameornot.net
------------------------------------------------------------------------------
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.44/2282 - Release Date: 08/04/09 18:01:00
18:28
New subject: Fred Omniorb Problem
Broadstocks escribió:
Having trouble getting the omniorb nameserver to start
even when I initialize things in order , and get to
/usr/sbin/invoke-rc.d omniorb4-nameserver start , it gives me FAIL
getting error
Error when generating zone: Is nameservice running?
(CORBA.TRANSIENT(omniORB.TRANSIENT_ConnectFailed, CORBA.COMPLETED_NO))
Exception AttributeError: "'Zone' object has no attribute
'zonedata'"
in <bound method Zone.__del__ of <pyfred.zone.Zone object at
0x9279e6c>> ignored
anyone know what causing this, as far as I can tell it doesn't look
like omniorb is setup properly , used netstat -pant to check LISTEN
state and it seemed. Any idea's?
run into same problem when using fred-manager method too
thanks
Have you used
fred-admin --zone_add
and
fred-admin --zone_ns_add?
Best regards.
Mario
9 Srp
9 Srp
5:25
New subject: Fred Omniorb Problem
thanks for the reply
fred-admin --zone_add and fred-admin --zone_ns_add?
return with
Error: option value 'zone_fqdn' not found in configuration
tried"
fred-admin --registrar_add_zone --zone_fqdn=cz --registrar_handle=REG-FRED"
and it didn't return anything, not sure if its meant to:Sand when running
fred-client I am getting "ERROR: Login
Failed"fred-client/usr/local/lib/python2.6/site-packages/fred/session_base.py:649:
DeprecationWarning: os.popen3 is deprecated. Use the subprocess module.
pipes =
os.popen3(self._external_validator)/usr/local/lib/python2.6/site-packages/fred/client_socket.py:141:
DeprecationWarning: socket.ssl() is deprecated. Use ssl.wrap_socket()
instead. self._conn_ssl = socket.ssl(self._conn, DATA[2],
DATA[3])FredClient 2.1.4Type "help", "license" or "credits"
for more
information.Using configuration from
/usr/local/etc/fred/fred-client.confConnecting to localhost, port 700
...ERROR: Login failed.> Broadstocks escribió:
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.48/2291 - Release Date: 08/08/09
18:17:00
Having trouble
getting the omniorb nameserver to start
even when I initialize things in order , and get to
/usr/sbin/invoke-rc.d omniorb4-nameserver start , it gives me FAIL
getting error
Error when generating zone: Is nameservice running?
(CORBA.TRANSIENT(omniORB.TRANSIENT_ConnectFailed, CORBA.COMPLETED_NO))
Exception AttributeError: "'Zone' object has no attribute
'zonedata'"
in <bound method Zone.__del__ of <pyfred.zone.Zone object at
0x9279e6c>> ignored
anyone know what causing this, as far as I can tell it doesn't look
like omniorb is setup properly , used netstat -pant to check LISTEN
state and it seemed. Any idea's?
run into same problem when using fred-manager method too
thanks
Have you used
fred-admin --zone_add
and
fred-admin --zone_ns_add?
Best regards.
Mario
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
17:53
Hi,
as Umarzuki pointed out, the obvious reason for this error is that
servers are not running. Check output of 'ps -axu' if there are running
daemons fred-pyfred, fred-rifd, fred-adifd and fred-pifd.
Regards,
Jaromir
On Wed, 2009-08-05 at 23:59 +1000, Broadstocks wrote:
Hi all,
bit of a beginners question just installing fred using fred-manager.
Installed all neccessary packages now going to run fred get the
following
./root/bin/fred-client
/tmp/root/lib/python2.6/site-packages/fred/session_base.py:649:
DeprecationWarning: os.popen3 is deprecated. Use the subprocess
module.
pipes = os.popen3(self._external_validator)
FredClient 2.1.2
Type "help", "license" or "credits" for more information.
Using configuration from /tmp/root/etc/fred/fred-client.conf
Connecting to localhost, port 22351 ...
ERROR: I cannot connect to the server localhost.
Connection socket.error: [Errno 111] Connection refused
(localhost:22351)
not sure if this is just a typical error from an incorrect ssl
certificate or something else,
thanks
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
10 Srp
10 Srp
12:36
New subject: fred webadmin
Hi ,
thanks Mario Guerra and Jaromír Talír for the help, everything seems ok can log into the
fred-client and get into the web interface but am seeing some errors when trying to access
parts of the web client
this occurs when trying to access Objects, Invoices
Traceback (most recent call last):
File "/var/lib/python-support/python2.6/cherrypy/_cprequest.py", line 551, in
respond
cherrypy.response.body = self.handler()
File "/var/lib/python-support/python2.6/cherrypy/_cpdispatch.py", line 24, in
__call__
return self.callable(*self.args, **self.kwargs)
File
"/home/administrator/root/lib/python2.6/site-packages/fred_webadmin/exposed.py",
line 24, in _wrapper
return view_func(*args, **kwd)
File
"/home/administrator/root/lib/python2.6/site-packages/fred_webadmin/adif.py",
line 157, in _wrapper
return view_func(*args, **kwd)
File
"/home/administrator/root/lib/python2.6/site-packages/fred_webadmin/adif.py",
line 337, in filter
context = self._get_list(context, form.cleaned_data, **kwd)
File
"/home/administrator/root/lib/python2.6/site-packages/fred_webadmin/adif.py",
line 192, in _get_list
table = self._get_itertable()
File
"/home/administrator/root/lib/python2.6/site-packages/fred_webadmin/adif.py",
line 187, in _get_itertable
itertable = IterTable(request_object, key, size)
File
"/home/administrator/root/lib/python2.6/site-packages/fred_webadmin/itertable.py",
line 32, in __init__
super(IterTable, self).__init__(self)
TypeError: object.__init__() takes no parameters
not quite sure why this error is occuring, some python problems or I haven't setup
everything correctly.thanks
----- Original Message -----
From: Mario Guerra
To: A mailing list for users and developers of FRED registry system
Sent: Monday, August 10, 2009 2:42 AM
Subject: Re: fred installation trouble
Jaromír Talír escribió:
Hi,
as Umarzuki pointed out, the obvious reason for this error is that
servers are not running. Check output of 'ps -axu' if there are running
daemons fred-pyfred, fred-rifd, fred-adifd and fred-pifd.
Regards,
Jaromir
Another possibility (I experimented that) is the absence of the PLPGSQL language. If you
guess that it's happening, check that postgresql-plperl-8.3 package is installed:
dpkg -l postgresql-plperl-8.3
root@mguerra:~# dpkg -l postgresql-plperl-8.3
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Installed/Config-f/Unpacked/Failed-cfg/Half-inst/t-aWait/T-pend
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Nombre Versión Descripción
+++-==============-==============-============================================
ii postgresql-plp 8.3.7-0ubuntu8 PL/Perl procedural language for PostgreSQL 8
If it is not, install it and then create the language for the "fred"
database.
Best regards
Mario
------------------------------------------------------------------------------
_______________________________________________
fred-users mailing list
fred-users(a)lists.nic.cz
https://lists.nic.cz/mailman/listinfo/fred-users
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.48/2291 - Release Date: 08/08/09 18:17:00
6059
days inactive
6064
days old
9 comments
4 participants
participants (4)
-
Broadstocks -
Jaromír Talíř -
Mario Guerra -
Umarzuki Mochlis