Hello,
to suppress output on console, you can redirect startup command output
to /dev/null. But I think, that this is no longer a case in new version.
I don't understand a note about iptables. If you had this port disabled
and you enabled it and it works, it;s ok. Of course the port is
configurable in /etc/fred/webadmin_cfg.py
Regards,
Jaromir
Dr Paulos Nyirenda píše v St 05. 11. 2008 v 17:52 +0200:
Great, improving, but I now have the following error
from fred-client, how do I connect
to the servers?
[root@ngoli paulos]# /usr/bin/fred-client
FredClient 1.6.1
Type "help", "license" or "credits" for more information.
Using configuration from /etc/fred/fred-client.conf
Connecting to localhost, port 700 ...
ERROR: Server returned an empty message.
Server didn't return Greeting message. Contact server administrator.
And when I go the website
http://ngoli.registrar.mw:18456, I get this output below on my
console - how do I suppress it?
I had to open port 18456 in iptables, should I disable iptables as well?
Regards, Paulos
[root@ngoli paulos]# ::ffff:41.179.13.175 - - [05/Nov/2008:18:08:19] "GET /
HTTP/1.1"
303 136 "" ""
::ffff:41.179.13.175 - - [05/Nov/2008:18:08:19] "GET / HTTP/1.1" 303 136
"" ""
::ffff:41.179.13.175 - - [05/Nov/2008:18:08:21] "GET /login/?next=/ HTTP/1.1"
200 1884 "" ""
::ffff:41.179.13.175 - - [05/Nov/2008:18:08:21] "GET /login/?next=/ HTTP/1.1"
200 1884 "" ""
::ffff:41.179.13.175 - - [05/Nov/2008:18:08:22] "GET /css/base.css HTTP/1.1"
200 192 "" ""
::ffff:41.179.13.175 - - [05/Nov/2008:18:08:22] "GET /css/base.css HTTP/1.1"
200 192 "" ""
::ffff:41.179.13.175 - - [05/Nov/2008:18:08:22] "GET /css/basesite.css
HTTP/1.1" 200 618
"" ""
On Wed, 05 Nov 2008 11:16:04 +0100, Jaromír [UTF-8?]TalÃÅ™ wrote
I guess I know. Problem could be SELinux. I
always turn it off because
it is a little bit complicated to run all this stuff in SELinux. If
SELinux is enabled you have to allow apache to bind to this port by some
special commands.
About half a year ago I made this attempt and these are some commands,
that may help:
semanage port -a -t http_port_t -p tcp 43
semanage port -a -t http_port_t -p tcp 700
setsebool -P httpd_can_network_connect=1
setsebool -P allow_daemons_use_tty=1
restorecon -R -v /var/lib/pgsql/data/pg_hba.conf
But I think that this is not enough (maybe some other commands are
needed), and finally I decided to disable SELinux at all. This is done
in /etc/sysconfig/selinux where you must set SELINUX=disabled and
restart linux.
Hope this will help.
Regards,
Jaromir
Dr Paulos Nyirenda [UTF-8?]pÃÅ¡e v St 05. 11. 2008 v 11:29 +0200:
> Jaromír Talír,
> or anyone else,
>
> Although my httpd was running ok, I am getting the following
> httpd error when I try to active the fred-server, could you please
> suggest what I can do to resolve it?
>
> [root@ngoli paulos]# /etc/rc.d/init.d/fred-server start
> Starting FRED central registry CORBA servers... [ OK ]
> [root@ngoli paulos]#
> [root@ngoli paulos]# /etc/rc.d/init.d/httpd restart
> Stopping httpd: [ OK ]
> Starting httpd: (13)Permission denied: make_sock: could not bind to address
[::]:700
> (13)Permission denied: make_sock: could not bind to address 0.0.0.0:700
> no listening sockets available, shutting down
> Unable to open logs
> [FAILED]
> [root@ngoli paulos]#
>
> This happens soon after installing fred-*.
>
> Regards,
>
> Paulos
>
> On 3 Nov 2008 at 17:29, Jaromír Talír wrote:
>
> > Hello Paulos,
> >
> > Dr Paulos Nyirenda píse v Po 27. 10. 2008 v 10:15 +0200:
> > > Hello,
> > >
> > > Will there be anyone from .CZ at the ICANN Cairo meeting whom I could
> > > meet to consult on FRED?
> >
> > I will not be in Cairo, but our CEO Ondrej Filip is there. I thing he
> > can answer some questions about FRED.
> >
> > > It would really help if I could have a brief technical meeting on
> > > FRED.
> > > I have installed FRED on fedora8 and I need a few pointer on a few
> > > areas including
> > > (a) how I could finalise httpd, epp configuartion,
> > > (b) how to use it successfully
> >
> > I don't know how to answer these questions. If you installed all
> > components using 'yum install fred-*'. You have to start all servers.
> >
> > sudo /etc/init.d/postgresql initdb
> > sudo /etc/init.d/postgresql start
> > sudo /etc/init.d/omniNames start
> > sudo /etc/init.d/fred-server start
> > sudo /etc/init.d/httpd start
> > sudo /etc/init.d/fred-webadmin-server start
> >
> > Then you can connect to server with:
> > /usr/bin/fred-client
> >
> > > (c) how I could efficiently or quickly import our current .mw ccTLD
> > > registry data into FRED
> >
> > First you will have to configure FRED for .mw. You shoud add your system
> > registrar and your zone to FRED and allow this registrar to register
> > this zone.
> >
> > /usr/sbin/fred-admin --zone_add --zone_fqdn=tz
> > /usr/sbin/fred-admin --registrar_add --registrar_handle=REG-MW
> >
> > Now change in /etc/fred/fred-client.conf username from REG-FRED_A to
> > REG-MW. You sould be able to connect with this registrar
> >
> > When we migrated from old system to FRED we used normal fred-client. You
> > will have to create commands (create_contact, create_nsset,
> > create_domain) that reflect your current database and use fred-client to
> > process these commands.
> >
> > Regards,
> > Jaromir
> >
>
>
>
>
> Paulos
> ==============================
> Dr Paulos Nyirenda
> Malawi SDNP Coodinator
> ----------------------------------------------------------
> Malawi SDNP Webmail:
http://www.sdnp.org.mw
> Access your Malawi SDNP e-mail from anywhere in the world.
> ----------------------------------------------------------
>
Paulos
==============================
Dr Paulos Nyirenda
Malawi SDNP Coodinator
----------------------------------------------------------
Malawi SDNP Webmail:
http://www.sdnp.org.mw
Access your Malawi SDNP e-mail from anywhere in the world.
----------------------------------------------------------