In our current system in Faroe Islands, we dont use nssets.
For each domain name there are 2 nameservers.
So we only have one domain name table, and one nameserver table.
In FRED i think it is impossible to connect a nameserver directly to one domain ?
I can only connect a nsset to one domain, right ?
Which means i have to go through all our nameservers, and put them into nssets, right ?
Can you confirm, that I have understood this correct ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
In Faroe Islands we do NOT use registrars.
The customers apply for domain names directly on the cctldM's homepage.
For each domain we have 3 kinds of contacts:
Administrative Contact (Holder of Domain)
Nameserver Contact (Zone Contact)
Billing Contact (where to send the bill)
I am trying to use as much as possible of FRED, and build as little as possible myself.
So i was thinking about, if i could maintain our "Billing Contacts" in the same way as "Registrars" are maintained in the FRED system ?
I asked something a bit similar before, and I think that you will not recommend this, but i just want to hear your opinion again, so i can
understand it as good as possible.
Is it to difficult with all the usernames and passwords ? (technical)
And are there other things, where there is a difference between "registrars" and our "Billing contacts" ? (data in database?)
What do you think ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
We have a few domain names, which we dont want anyone to apply for, for example com.fo, net.fo, org.fo and so on.
Is this what the table domain-blacklist is for ?
If yes, how do i put these domain names in the table ? Manually or with a command ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Dear all,
I have installed FEDORA 9 i.386,
I installed the fred-repo-1.0-1.noarch.rpm and then install FRED with yum
install fred-*.
I restarted HTTPD service, the fred-server and fred-webadmin-server.
All went successfully except the fred-webadmin-server, showing the
following:
*#/etc/init.d/fred-webadmin-server start
Starting FRED webadmin HTTP server... [ OK ]
KEEP LOGGING TO /var/log/fred-webadmin-20081112.log
[# -----====### STARTING ADIF ###====-----
[12/Nov/2008:11:32:39] HTTP Port 18456 not free on 'localhost'
[12/Nov/2008:11:32:39] HTTP Port 18456 not free on 'localhost'
Traceback (most recent call last):
File "/usr/sbin/fred-webadmin", line 12, in <module>
adif.runserver()
File "/usr/lib/python2.5/site-packages/fred_webadmin/adif.py", line 1329,
in runserver
cherrypy.quickstart(root, '/', config=config.cherrycfg)
File "/usr/lib/python2.5/site-packages/cherrypy/__init__.py", line 181, in
quickstartserver.quickstart()
File "/usr/lib/python2.5/site-packages/cherrypy/_cpserver.py", line 69, in
quickstartself.start()
File "/usr/lib/python2.5/site-packages/cherrypy/_cpserver.py", line 95, in
startself._start_http(httpserver)
File "/usr/lib/python2.5/site-packages/cherrypy/_cpserver.py", line 104,
in _start_httpwait_for_free_port(*bind_addr)
File "/usr/lib/python2.5/site-packages/cherrypy/_cpserver.py", line 250,
in wait_for_free_portraise IOError(msg)
IOError: Port 18456 not free on 'localhost'*
THANKs
-
*Edouard MASHYARINGA.
ccTLD Administartor (.rw) Rwanda
RICTA/RITA
KIGALI/Rwanda
Mob: 250 08352776
250 05129000*
In Faroe Islands we have 2 kinds of domain applications named A applications and B applications.
When the customer makes an A application, the domain is created immediately.
When the customer makes a B application, the domain will be created 1 month after the application is done.
So my question is:
Is it possible to create one domain (incl. contacts, nameservers) in FRED, and make it DISABLED until 1 month is gone ?
Or do i have to save all the information outside of FRED until 1 month is gone, and then create the domain in FRED ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hey Guys,
I have got FRED operating today. However, when I use fred-client and
try and create_contacts I get command failed.
Below is the output;
wogg_85(a)192.168.0.19> create_contact CID:ID02 'Jan Ban' info(a)mail.com
Street Brno 123000 CZ
Do you really want to send this command to the server? (y/N): y
ERROR: Command failed
As this is all very new to me, I am not sure what else I can post. I
followed the instructions at http://fred.nic.cz/wiki/howto to get it
operating. Also the script to load the first zone did not work. This
is becuase the FRED binary is not around, I assume the replacement is
fred-admin, but unsure how it would work.
Any help would be greatly appreciated! Let me know if you need any
more info.
Regards,
Julian
I have tryed the client_example.php script.
Whatever i do, it answeres:
Error:
fred_client not instaled properly. See help or set prefix of path.
As far as i know fred_client is working on the machine as it should.
So i want to ask these questions:
1) What should i write in the $exec_path field ? The path to what ?
2) Where (in which file) do i set the PHP output mode ?
3) My configuration file is in /etc/fred. Should i move it too /etc ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hey,
I was curios how fred handles zone generation automatically. I have
found the command line tool, but I am un-sure if this process is
automated.
--julian
Jaromír Talír,
or anyone else,
Although my httpd was running ok, I am getting the following
httpd error when I try to active the fred-server, could you please
suggest what I can do to resolve it?
[root@ngoli paulos]# /etc/rc.d/init.d/fred-server start
Starting FRED central registry CORBA servers... [ OK ]
[root@ngoli paulos]#
[root@ngoli paulos]# /etc/rc.d/init.d/httpd restart
Stopping httpd: [ OK ]
Starting httpd: (13)Permission denied: make_sock: could not bind to address [::]:700
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:700
no listening sockets available, shutting down
Unable to open logs
[FAILED]
[root@ngoli paulos]#
This happens soon after installing fred-*.
Regards,
Paulos
On 3 Nov 2008 at 17:29, Jaromír Talír wrote:
> Hello Paulos,
>
> Dr Paulos Nyirenda píse v Po 27. 10. 2008 v 10:15 +0200:
> > Hello,
> >
> > Will there be anyone from .CZ at the ICANN Cairo meeting whom I could
> > meet to consult on FRED?
>
> I will not be in Cairo, but our CEO Ondrej Filip is there. I thing he
> can answer some questions about FRED.
>
> > It would really help if I could have a brief technical meeting on
> > FRED.
> > I have installed FRED on fedora8 and I need a few pointer on a few
> > areas including
> > (a) how I could finalise httpd, epp configuartion,
> > (b) how to use it successfully
>
> I don't know how to answer these questions. If you installed all
> components using 'yum install fred-*'. You have to start all servers.
>
> sudo /etc/init.d/postgresql initdb
> sudo /etc/init.d/postgresql start
> sudo /etc/init.d/omniNames start
> sudo /etc/init.d/fred-server start
> sudo /etc/init.d/httpd start
> sudo /etc/init.d/fred-webadmin-server start
>
> Then you can connect to server with:
> /usr/bin/fred-client
>
> > (c) how I could efficiently or quickly import our current .mw ccTLD
> > registry data into FRED
>
> First you will have to configure FRED for .mw. You shoud add your system
> registrar and your zone to FRED and allow this registrar to register
> this zone.
>
> /usr/sbin/fred-admin --zone_add --zone_fqdn=tz
> /usr/sbin/fred-admin --registrar_add --registrar_handle=REG-MW
>
> Now change in /etc/fred/fred-client.conf username from REG-FRED_A to
> REG-MW. You sould be able to connect with this registrar
>
> When we migrated from old system to FRED we used normal fred-client. You
> will have to create commands (create_contact, create_nsset,
> create_domain) that reflect your current database and use fred-client to
> process these commands.
>
> Regards,
> Jaromir
>
Paulos
==============================
Dr Paulos Nyirenda
Malawi SDNP Coodinator
----------------------------------------------------------
Malawi SDNP Webmail: http://www.sdnp.org.mw
Access your Malawi SDNP e-mail from anywhere in the world.
----------------------------------------------------------
Im thinking about, in which order i have to do the fred-client commands.
For example, when i want to run the create_domain command, i think under normal circumstances i first need to run the create_contact command.
And do i need to run check_domain before i run a create_domain command, or does the system check this automatically ?
And when i run delete_domain, does the system check, if i first have to delete one contact, which is only used in this domain ?
Is there any documentation on this subject ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
