- fred-users - lists.nic.cz

Prices for creating and renewing domains

by Mario Guerra

Hello. We've tested applying credits to registrars using FRED. Now, I want to make a question of how the deductions are made. Say, I decide to have 40 monetary units for domain creation and 10 for domain update for renewing my domain, this way. /fred-admin --price_add --operation_price 40.00 --zone_fqdn dom --operation CreateDomain/ /fred-admin --price_add --operation_price 10.00 --zone_fqdn dom --operation RenewDomain/ and assign 140 monetary units to their credit, this way /fred-admin --invoice_credit --zone_id 1 --registrar_id 6 --price 140/ The zone numbered 1 is "dom" . When I create a domain like this: /create_domain testmg6.dom mf02 NULL NULL NULL (1 y) / What is deducted from the credit is 80 monetary units, not 70, so what is left is 60. Is that correct?. If it is, how to apply ONLY the renewal price when you renew the domain, not when you create it?. Best regards. Mario Guerra NIC-CR

7 let, 12 měsíců

2
2
0 0

Re: payments - invoices and statements on FRED registry system

by Dr P Nyirenda

On 27 Jun 2017 at 9:18, Ghislain wrote: > Good Morning all, > > We (i.e. .RW registry – RICTA Ltd.) are not using FRED but I think the prepayment model is more > or less the same. > > #1. We don’t pre-invoice the registrars based on a “pre-established” list of domain names. > This is a lot of work, and it won’t scale if you have 100 of registrars, unless the registry does that > for them. > But even if it is possible from the registry, it is a lot of work for “them” (i.e. manual work). > > Therefore, they (registrars) just send money/amount, let say $500 or 30,000 RWF, and that is > what we issue the invoice for. > With a simple description, i.e. “Advance payment”. BTW, the amount can vary depending on > what they want to register, renew, etc. Thank you for the input, most of this is already the same on .mw registry. > The law in Rwanda don’t allow to receive money without an invoice. (it being advance or actual > payment). It appears there is no such law in Malawi and this is part of the reason I raised the question - to learn what is the case with other ccTLD registries. > #2. Once received, we credit their accounts in the Registry system. (still a manual process). > Then they can do whatever they want with it (i.e. do registration, renewal, pay for transfer fees, > etc.). Same. So, does your registry system have facilities for generating invoices such as these for pre-payments? Does it produce statements form registrars? Regards, Paulos ====================== Dr Paulos B Nyirenda NIC.MW & .mw ccTLD http://www.registrar.mw > > I think this approach (above) is more flexible. > > A little additional info: > > The money received from registrars, is a liability until it is consumed. > Until it is consumed, it cannot yet be called revenues from your side (registry). > From financial “documents” perspective, an un-consumed advance payment is a liability that > needs to seat in the balance sheet. > Once the revenue is realized (end of month), the money can be recognized in you Income > statement. (you debit the liability and credit your income accounts). > > Sorry if this is perhaps more than what you asked for. > > Thank you, > > Ghislain > .RW registry > > From: fred-users <fred-users-bounces(a)lists.nic.cz> on behalf of Jaromir Talir > <jaromir.talir(a)nic.cz> > Reply-To: A mailing list for users and developers of FRED registry system > <fred-users(a)lists.nic.cz> > Date: Friday, 23 June 2017 at 17:18 > To: <paulos(a)sdnp.org.mw>, <fred-users(a)lists.nic.cz> > Subject: Re: payments - invoices and statements on FRED registry system > > Hi Paulos, > > I guess this is more question for some Malawi lawyer. In Czech Republic > we have a law that we should issue invoice when we receive advanced > payment. However, this may be something specific for our legislation. > Also every legislation specifies what should be the content of the > invoice in that case (issuer, recipient, day of payment, effective day > of service, etc..). This may differ country to country as well. FRED > contains PDF templates for invoices according Czech legislation. I > cannot say if they may be used for you as well. > > If you will be in Joburg, we can have a talk about it there. > > Regards, > Jaromir > > On Fri, 2017-06-16 at 05:15 +0200, Dr P Nyirenda wrote: > Hello, > I would like to find out how your registry responds to a request like > the one here below > for invoices and statements on registrar payments to a registry that > uses the FRED > registry system. > On our registry for the Malawi .mw ccTLD, registrar payments are > credited to the > registrar zone by zone according to what the registrar has paid for. > Once the registrar > has consumed the credit, then they need to make a new payment in > advance which is then > credited to the zones that they need. > We do not need to issue them an invoice in advance, they make the > payments based on what > transactions they need to do on each zone. > When we receive a request for their data payments, we have used > Invoice on Daphne to > generate the data and we have sent this to the registrar. > However, as you can see here below, this registrar seems to be asking > for more. > I would therefore like to request information on how your registry > using FRED handles > requests for data, invoices and statements like these. > Regards, > Paulos > ====================== > Dr Paulos B Nyirenda > NIC.MW & .mw ccTLD > http://www.registrar.mw > ------- Forwarded message follows ------- > From: Jamil Kamaly <Jamil.Kamaly(a)NetNames.com > > To: "paulos(a)sdnp.org.mw" <paulos(a)sdnp.org.mw> > Copies to: Michal Czyz <Michal.Czyz(a)NetNames.com>, domains mw > <domains(a)registrar.mw>, > PB Nyirenda <pb.nyirenda(a)gmail.com> > Subject: RE: Malawi payments. > Date sent: Wed, 14 Jun 2017 11:56:39 +0000 > Hi Dr Paulos, > I think you might have misunderstood, I wasn’t complaining. The > details you provided me > in April was excel spreadsheet with payment details and the zones > that were topped. We > need proper invoices and statements and therefore I was following up > on our last > conversation where you was saying that you are developing a system to > make this possible. > I was just checking if this is now possible and would we be getting > proper statements > and invoices. > Thank you. > Kind regards, > Jamil > ---------------------------------------------------------- > Malawi SDNP Webmail: http://www.sdnp.org.mw > Access your Malawi SDNP e-mail from anywhere in the world. > ---------------------------------------------------------- > -- > Jaromir Talir > Technicky partner / Technical Fellow > ------------------------------------------- > CZ.NIC, z.s.p.o. -- .cz domain registry > Milesovska 5, 130 00 Praha 3, Czech Republic > mailto:jaromir.talir@nic.cz http://nic.cz/ > sip: jaromir.talir(a)nic.cz tel:+420.222745107 > mob:+420.739632712 fax:+420.222745112 > ------------------------------------------- > _______________________________________________ > fred-users mailing list > fred-users(a)lists.nic.cz > https://lists.nic.cz/cgi-bin/mailman/listinfo/fred-users > ---------------------------------------------------------- Malawi SDNP Webmail: http://www.sdnp.org.mw Access your Malawi SDNP e-mail from anywhere in the world. ----------------------------------------------------------

8 let

1
0
0 0

RE: payments - invoices and statements on FRED registry system

by Dr P Nyirenda

Hello, I would like to find out how your registry responds to a request like the one here below for invoices and statements on registrar payments to a registry that uses the FRED registry system. On our registry for the Malawi .mw ccTLD, registrar payments are credited to the registrar zone by zone according to what the registrar has paid for. Once the registrar has consumed the credit, then they need to make a new payment in advance which is then credited to the zones that they need. We do not need to issue them an invoice in advance, they make the payments based on what transactions they need to do on each zone. When we receive a request for their data payments, we have used Invoice on Daphne to generate the data and we have sent this to the registrar. However, as you can see here below, this registrar seems to be asking for more. I would therefore like to request information on how your registry using FRED handles requests for data, invoices and statements like these. Regards, Paulos ====================== Dr Paulos B Nyirenda NIC.MW & .mw ccTLD http://www.registrar.mw ------- Forwarded message follows ------- From: Jamil Kamaly <Jamil.Kamaly(a)NetNames.com> To: "paulos(a)sdnp.org.mw" <paulos(a)sdnp.org.mw> Copies to: Michal Czyz <Michal.Czyz(a)NetNames.com>, domains mw <domains(a)registrar.mw>, PB Nyirenda <pb.nyirenda(a)gmail.com> Subject: RE: Malawi payments. Date sent: Wed, 14 Jun 2017 11:56:39 +0000 Hi Dr Paulos, I think you might have misunderstood, I wasn’t complaining. The details you provided me in April was excel spreadsheet with payment details and the zones that were topped. We need proper invoices and statements and therefore I was following up on our last conversation where you was saying that you are developing a system to make this possible. I was just checking if this is now possible and would we be getting proper statements and invoices. Thank you. Kind regards, Jamil ---------------------------------------------------------- Malawi SDNP Webmail: http://www.sdnp.org.mw Access your Malawi SDNP e-mail from anywhere in the world. ----------------------------------------------------------

8 let

3
2
0 0

Maximum renewal period in FRED

by Dr Paulos B Nyirenda

Jaromir, Just one or two more clarifications on FRED: 1. Is there a default maximum number of years (or months) for renewing a domain ? I see that in .cz this is required to be 10 years - is this burned into FRED or can it be modified? See: https://www.nic.cz/files/nic/doc/Registration_rules_CZ.pdf Regards, Paulos ====================== Dr Paulos B Nyirenda NIC.MW & .mw ccTLD http://www.registrar.mw

8 let, 2 měsíce

3
2
0 0

Invitation à participer à Meetup#2 Présentation et Workshop Openstack

by Ousmane Sanogo

Vous avez reçu une invitation ! -------------------------------------- Rejoignez Ousmane Sanogo à Meetup#2 Présentation et Workshop Openstack Quand : samedi 29 avril 2017, 09:00 Où : Ecole Agitel-Formation 132, Abidjan, Côte d'Ivoire, Abidjan Ce Meetup est organisé par Openstack Côte d'Ivoire. Après une première rencontre pour fêter les 6 ans de Openstack et le lancement du groupe d'utilisateur de Côte d'ivoire, nous organisons un second Meetup qui va vous permettre de mieux connaitre Open... https://secure.meetup.com/n/?s=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJkZXN… -------------------------------------- ------- Message envoyé par Meetup de la part de Ousmane Sanogo (https://www.meetup.com/fr-FR/Openstack-Cote-divoire/members/212092234/) depuis Openstack Côte d'Ivoire. Une question? Vous pouvez contacter le support Meetup via support(a)meetup.com Je ne souhaite plus recevoir ce type d'e-mail (https://secure.meetup.com/n/?s=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJob29…) Meetup Inc. (https://www.meetup.com/fr-FR/), POB 4668 #37895 New York NY USA 10163

8 let, 3 měsíce

1
0
0 0

new documentation for FRED (available on github)

by Jaromir Talir

Hi, in addition to new FRED release, we have also released a new website at https://fred.nic.cz and completely new documentation system. Documentation url is https://fred.nic.cz/documentation. I feel importance of this deserves to use separate email for announcement. New documentation is searchable and it contains many new graphical schemas important to understand FRED architecture and processes. Source code of this documentation in reStructuredText format is available on github https://github.com/CZ-NIC/fred-docs. This means that you are more then welcomed to submit comments or preferably pull requests for things that you think they are missing in documentation. Please, check documentation and let us know what you think about this. Regards, Jaromir

8 let, 3 měsíce

1
0
0 0

new version FRED-2.29

by Jaromir Talir

Hi, we have published FRED version 2.29. During several previous releases we have rewritten almost all code responsible for EPP communication with registrars. This refactoring was necessery for implementation of new features in the future. Here is a compilation of some significant changes. - support for more operating systems. For the first time we provide also packages for latest RHEL/Centos version 7. Since Ubuntu 12.04 will lost its long term support in April, we will not provide packages for this version anymore. Preffered version of Ubuntu is 16.04. We use Ubuntu 16.04 in production for some time without any issues. This also means that Ubuntu 16.04 is most tested platform. In other platforms we only run limited set of automated tests so registries are required to do more indepth tests themselves. - configurable domain name format checking. Checking of validity of domain name is configurable per zone via linking to set of preconfigured checkers in database table zone_domain_name_validation_checker_map. - new idn support configuration. There used to be allow_idn option in server configuration file that meant that regular registrars are able to register domains in xn-- format (idn domains) in all zones. In current version it is possible to configure idn support per zone via mechanism mentioned earlier. Support for idn is just another preconfigured checker. - configurable dnssec algorithm checking. Until now, there was no checking of dnssec algorithm number used in EPP create_keyset or update_keyset EPP commands. If registries would like to limit this check only for some algorithms, they can do that via modification of database tables dnssec_algorithm and dnssec_algorithm_blacklist. - configurable limit of minimal number of nameservers in nsset. Until now, there was hardcoded requirement to have at least 2 nameservers and maximum 10 nameservers in nsset. Since this was limitation for some registries that wanted to use FRED, we moved this limit into configuration option nsset_min_hosts and nsset_max_hosts in server configuration file - asynchronous notification about EPP events. Notifications for domain state change has always been generated asynchronously via fred-admin commands, but notifications about EPP events done by registrars were created as part of EPP operation. To speed up system a little bit and to be able to continue EPP operation even when notification system is down, we made also notification about EPP events asynchronnous. So don't forget to add into cron system command 'fred-admin -- notify_email_objects_events' in intervals of your preference if you want to keep sending notifications. Regards, Jaromir

8 let, 3 měsíce

1
0
0 0

FRED and Apache 2.4 on Ubuntu 14.04

by Mario Guerra

People: A nagging problem we had when we migrated FRED to Ubuntu 14.04 (until a couple of weeks ago we ran 2.22 on Ubuntu 12.04) was that, suddenly, Apache connections gave us a CLOSE_WAIT, not a clean closing of the connection. This gave us a real headache with both our whois server and our EPP server. The solution?. Well, simply uninstall the mpm_event Apache module and install the mem_prefork one: a2dismod mpm_event a2enmod mem_prefork service apache2 restart I hope this helps the people using FRED under Ubuntu 14.04 experiencing a similar problem. ------------ Mario Guerra NIC-CR

8 let, 5 měsíců

2
1
0 0

ERROR HEADER: unpack requires a string argument of length 4

by Jakub Andrys

Hi, I have clean install of Ubuntu 16.04 server and I use script install: https://fred.nic.cz/page/2906/installation-on-ubuntu/ everything looks OK, but when I wan use fred-client, got this error: # fred-client FredClient upstream/2.7.0-97-g21a67 Type "help", "license" or "credits" for more information. Using configuration from /root/.fred-client.conf Used socket type: IPv6. Socket timeout: 10.0 sec. Connecting to localhost, port 700 ... Connection established. Try to open SSL layer... SSL layer opened. ERROR: ERROR HEADER: unpack requires a string argument of length 4 Server didn't return Greeting message. Contact server administrator. in /var/log/fred-eppd.log [19/Jan/2017:10:02:56 +0100] ::1 (process:2354) [sessionID 352216] Could not obtain object reference for alias 'EPP_alias'. Check mod_corba's configuration. [19/Jan/2017:10:02:56 +0100] ::1 (process:2354) [sessionID 352216] Could not obtain object reference for alias 'EPP_alias'. Connection on port 700 looks OK. Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 192.168.120.153:53 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:953 0.0.0.0:* LISTEN tcp6 0 0 :::43 :::* LISTEN tcp6 0 0 :::80 :::* LISTEN tcp6 0 0 :::53 :::* LISTEN tcp6 0 0 :::22 :::* LISTEN tcp6 0 0 :::25 :::* LISTEN tcp6 0 0 :::2809 :::* LISTEN tcp6 0 0 ::1:953 :::* LISTEN tcp6 0 0 :::443 :::* LISTEN tcp6 0 0 :::700 :::* LISTEN udp 0 0 192.168.120.153:53 0.0.0.0:* udp 0 0 127.0.0.1:53 0.0.0.0:* udp 0 0 0.0.0.0:68 0.0.0.0:* udp6 0 0 :::53 :::* Any idea whats wrong? Regards, Jakub

8 let, 5 měsíců

2
1
0 0

Weak digest algorithm @ archive.nic.cz

by Torkil Zachariassen

While running # apt-get update on Ubunto-16 as warning is issued: W: http://archive.nic.cz/ubuntu/dists/xenial/Release.gpg: Signature by key 55360425D50EB41DB9A21E67F20C079E020ADBB4 uses weak digest algorithm (SHA1) It seems that Debian and friends do not like SHA1 any longer. They provide more info on the removal of sha1 and how to fix a half-broken repositories https://wiki.debian.org/Teams/Apt/Sha1Removal I suppose the fred repository for ubunto at archive.nic.cz could be updated along those lines.

8 let, 6 měsíců

1
0
0 0

IDN in fred? Howto

by Torkil Zachariassen

We are to try out having a few extra national characters áýúíóæøåð and in uppercase these are ÁÝÚÍÓÆØÅÐ in ccTLD names (.fo) We found the 'allow_idn' in server.conf and have it set as 'true' (allow_idn = true), but this seems not to be enough, and does not really fullfill the requirements. IDN is mentioned an option in fred, but where/how can we turn this on, and what should we be aware of ? ...torkil...

8 let, 6 měsíců

3
7
0 0

On Ubuntu 16.04.1 LTS - updating broke fred

by Torkil Zachariassen

Sorry for this lengthy message, but a bugfix is provided with a description of the issue in the latest packages of fred for ubunto Have a nice day On Ubuntu 16.04.1 LTS - just updated and upgraded everything including fred, broke fred # systemctl status fred-logd ● fred-logd.service - FRED logging daemon Loaded: loaded (/lib/systemd/system/fred-logd.service; enabled; vendor preset: enabled) Active: inactive (dead) (Result: exit-code) since Fri 2016-12-30 16:56:12 WET; 17min ago Process: 3653 ExecStart=/usr/sbin/fred-logd -ORBendPoint giop:tcp::2226 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-logd.conf (code=exited, status=1/FAILURE) Main PID: 3653 (code=exited, status=1/FAILURE) Dec 30 16:56:12 fred-ubunto-16 systemd[1]: fred-logd.service: Failed with result 'exit-code'. Dec 30 16:56:12 fred-ubunto-16 systemd[1]: fred-logd.service: Service hold-off time over, scheduling restart. Dec 30 16:56:12 fred-ubunto-16 systemd[1]: Stopped FRED logging daemon. Dec 30 16:56:12 fred-ubunto-16 systemd[1]: fred-logd.service: Start request repeated too quickly. Dec 30 16:56:12 fred-ubunto-16 systemd[1]: Failed to start FRED logging daemon. Hmm where is fred-logd.conf ? In /etc/init/fred-logd.conf ! BUGFIX # cd /etc/fred # ln -s ../init/fred-logd.conf root@fred-ubunto-16:/etc/fred# systemctl start fred-logd root@fred-ubunto-16:/etc/fred# systemctl status fred-logd ● fred-logd.service - FRED logging daemon Loaded: loaded (/lib/systemd/system/fred-logd.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2016-12-30 17:22:57 WET; 2s ago Main PID: 4600 (fred-logd) Tasks: 3 Memory: 2.5M CPU: 25ms CGroup: /system.slice/fred-logd.service └─4600 /usr/sbin/fred-logd -ORBendPoint giop:tcp::2226 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-logd.conf Dec 30 17:22:57 fred-ubunto-16 systemd[1]: Started FRED logging daemon. So the bugfix worked :-) Next issue: # systemctl status fred-rifd ● fred-rifd.service - FRED registrar interface daemon Loaded: loaded ( ; enabled; vendor preset: enabled) Active: inactive (dead) (Result: exit-code) since Fri 2016-12-30 16:50:26 WET; 35min ago Process: 3321 ExecStart=/usr/sbin/fred-rifd -ORBendPoint giop:tcp::2224 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-rifd.conf (code=exited, status=1/FAILURE) Main PID: 3321 (code=exited, status=1/FAILURE) Dec 30 16:50:25 fred-ubunto-16 systemd[1]: fred-rifd.service: Main process exited, code=exited, status=1/FAILURE Dec 30 16:50:25 fred-ubunto-16 systemd[1]: fred-rifd.service: Unit entered failed state. Dec 30 16:50:25 fred-ubunto-16 systemd[1]: fred-rifd.service: Failed with result 'exit-code'. Dec 30 16:50:26 fred-ubunto-16 systemd[1]: fred-rifd.service: Service hold-off time over, scheduling restart. Dec 30 16:50:26 fred-ubunto-16 systemd[1]: Stopped FRED registrar interface daemon. Dec 30 16:50:26 fred-ubunto-16 systemd[1]: fred-rifd.service: Start request repeated too quickly. Dec 30 16:50:26 fred-ubunto-16 systemd[1]: Failed to start FRED registrar interface daemon. Again /lib/systemd/system/fred-rifd.service specifies fred-rifd.conf to be in /etc/fred, were as it is in /etc/init :-/ BUGFIX # cd /etc/fred # ln -s ../init/fred-rifd.conf # cd # systemctl start fred-rifd # systemctl status fred-rifd ● fred-rifd.service - FRED registrar interface daemon Loaded: loaded (/lib/systemd/system/fred-rifd.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2016-12-30 17:30:01 WET; 6s ago Main PID: 4777 (fred-rifd) Tasks: 3 Memory: 3.3M CPU: 31ms CGroup: /system.slice/fred-rifd.service └─4777 /usr/sbin/fred-rifd -ORBendPoint giop:tcp::2224 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-rifd.conf Dec 30 17:30:01 fred-ubunto-16 systemd[1]: Started FRED registrar interface daemon. So the bugfix worked :-) Next issue: # systemctl status fred-pifd ● fred-pifd.service - FRED public interface daemon Loaded: loaded (/lib/systemd/system/fred-pifd.service; enabled; vendor preset: enabled) Active: inactive (dead) (Result: exit-code) since Fri 2016-12-30 16:28:07 WET; 1h 7min ago Process: 1334 ExecStart=/usr/sbin/fred-pifd -ORBendPoint giop:tcp::2223 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-pifd.conf (code=exited, status=1/FAILURE) Main PID: 1334 (code=exited, status=1/FAILURE) Tasks: 0 Memory: 0B CPU: 0 CGroup: /system.slice/fred-pifd.service Dec 30 16:28:07 fred-ubunto-16 systemd[1]: fred-pifd.service: Main process exited, code=exited, status=1/FAILURE Dec 30 16:28:07 fred-ubunto-16 systemd[1]: fred-pifd.service: Unit entered failed state. Dec 30 16:28:07 fred-ubunto-16 systemd[1]: fred-pifd.service: Failed with result 'exit-code'. Dec 30 16:28:07 fred-ubunto-16 systemd[1]: fred-pifd.service: Service hold-off time over, scheduling restart. Dec 30 16:28:07 fred-ubunto-16 systemd[1]: Stopped FRED public interface daemon. Dec 30 16:28:07 fred-ubunto-16 systemd[1]: fred-pifd.service: Start request repeated too quickly. Dec 30 16:28:07 fred-ubunto-16 systemd[1]: Failed to start FRED public interface daemon. BUGFIX # cd /etc/fred # ln -s ../init/fred-pifd.conf # cd # systemctl start fred-pifd # systemctl status fred-pifd ● fred-pifd.service - FRED public interface daemon Loaded: loaded (/lib/systemd/system/fred-pifd.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2016-12-30 17:36:47 WET; 10ms ago Main PID: 4941 (fred-pifd) Tasks: 1 Memory: 1.1M CPU: 5ms CGroup: /system.slice/fred-pifd.service └─4941 /usr/sbin/fred-pifd -ORBendPoint giop:tcp::2223 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-pifd.conf Dec 30 17:36:47 fred-ubunto-16 systemd[1]: Started FRED public interface daemon. So the bugfix worked :-) Next issue: # systemctl status fred-msgd ● fred-msgd.service - FRED messaging daemon Loaded: loaded (/lib/systemd/system/fred-msgd.service; enabled; vendor preset: enabled) Active: inactive (dead) (Result: exit-code) since Fri 2016-12-30 16:28:06 WET; 1h 9min ago Process: 1258 ExecStart=/usr/sbin/fred-msgd -ORBendPoint giop:tcp::2228 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-msgd.conf (code=exited, status=1/FAILURE) Main PID: 1258 (code=exited, status=1/FAILURE) Dec 30 16:28:05 fred-ubunto-16 systemd[1]: fred-msgd.service: Unit entered failed state. Dec 30 16:28:05 fred-ubunto-16 systemd[1]: fred-msgd.service: Failed with result 'exit-code'. Dec 30 16:28:06 fred-ubunto-16 systemd[1]: fred-msgd.service: Service hold-off time over, scheduling restart. Dec 30 16:28:06 fred-ubunto-16 systemd[1]: Stopped FRED messaging daemon. Dec 30 16:28:06 fred-ubunto-16 systemd[1]: fred-msgd.service: Start request repeated too quickly. Dec 30 16:28:06 fred-ubunto-16 systemd[1]: Failed to start FRED messaging daemon. Same thing BUGFIX # cd /etc/init # ln -s ../init/fred-msgd.conf # cd # systemctl start fred-msgd # systemctl status fred-msgd ● fred-msgd.service - FRED messaging daemon Loaded: loaded (/lib/systemd/system/fred-msgd.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2016-12-30 17:38:59 WET; 4s ago Main PID: 5016 (fred-msgd) Tasks: 3 Memory: 1.6M CPU: 20ms CGroup: /system.slice/fred-msgd.service └─5016 /usr/sbin/fred-msgd -ORBendPoint giop:tcp::2228 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-msgd.conf Dec 30 17:38:59 fred-ubunto-16 systemd[1]: Started FRED messaging daemon. So the bugfix worked :-) Next issue: # systemctl status fred-adifd ● fred-adifd.service - FRED administration interface daemon Loaded: loaded (/lib/systemd/system/fred-adifd.service; enabled; vendor preset: enabled) Active: inactive (dead) (Result: exit-code) since Fri 2016-12-30 16:28:08 WET; 1h 12min ago Process: 1352 ExecStart=/usr/sbin/fred-adifd -ORBendPoint giop:tcp::2222 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-adifd.conf (code=exited, status=1/FAILURE) Main PID: 1352 (code=exited, status=1/FAILURE) Dec 30 16:28:07 fred-ubunto-16 systemd[1]: fred-adifd.service: Unit entered failed state. Dec 30 16:28:07 fred-ubunto-16 systemd[1]: fred-adifd.service: Failed with result 'exit-code'. Dec 30 16:28:08 fred-ubunto-16 systemd[1]: fred-adifd.service: Service hold-off time over, scheduling restart. Dec 30 16:28:08 fred-ubunto-16 systemd[1]: Stopped FRED administration interface daemon. Dec 30 16:28:08 fred-ubunto-16 systemd[1]: fred-adifd.service: Start request repeated too quickly. Dec 30 16:28:08 fred-ubunto-16 systemd[1]: Failed to start FRED administration interface daemon. Again same thing BUGFIX # cd /etc/fred # ln -s ../init/fred-adifd.conf # cd # root@fred-ubunto-16:~# systemctl start fred-adifd # root@fred-ubunto-16:~# systemctl status fred-adifd ● fred-adifd.service - FRED administration interface daemon Loaded: loaded (/lib/systemd/system/fred-adifd.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2016-12-30 17:41:42 WET; 4s ago Main PID: 5128 (fred-adifd) Tasks: 4 Memory: 3.3M CPU: 29ms CGroup: /system.slice/fred-adifd.service └─5128 /usr/sbin/fred-adifd -ORBendPoint giop:tcp::2222 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-adifd.conf Dec 30 17:41:42 fred-ubunto-16 systemd[1]: Started FRED administration interface daemon. Final check # fred-status && echo ok ok DONE :-) NOTE fred-status is a local script which looks like this: ####################################################################### #!/bin/sh # File: fred-status.sh # Purpose: Check that fred runs all the 7 required processes # Author: Torkil Zachariassen # Date: 20161209 CMD="ps -u fred --no-headers" count=`$CMD|wc -l` if [ $count -ne 7 ]; then echo ERROR Wrong number of processes $CMD exit 1 fi # return ok return 0 NOTE $ ps -u fred should return the following processes PID TTY TIME CMD 1096 ? 00:01:32 fred-webadmin 1181 ? 00:00:03 fred-logd 1182 ? 00:00:00 fred-rifd 1217 ? 00:00:00 fred-pifd 1218 ? 00:00:01 fred-adifd 3574 ? 00:00:00 fred-msgd 3685 ? 00:00:05 fred-pyfred ####################################################################### It seems that the problem are the following lines in fred-* in /lib/systemd/system: # grep /fred/fred /lib/systemd/system/fred-* /lib/systemd/system/fred-adifd.service:ExecStart=/usr/sbin/fred-adifd -ORBendPoint giop:tcp::2222 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-adifd.conf /lib/systemd/system/fred-logd.service:ExecStart=/usr/sbin/fred-logd -ORBendPoint giop:tcp::2226 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-logd.conf /lib/systemd/system/fred-msgd.service:ExecStart=/usr/sbin/fred-msgd -ORBendPoint giop:tcp::2228 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-msgd.conf /lib/systemd/system/fred-pifd.service:ExecStart=/usr/sbin/fred-pifd -ORBendPoint giop:tcp::2223 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-pifd.conf /lib/systemd/system/fred-rifd.service:ExecStart=/usr/sbin/fred-rifd -ORBendPoint giop:tcp::2224 -ORBnativeCharCodeSet UTF-8 --config /etc/fred/fred-rifd.conf as these references configuration files in /etc/fred, whereas the actual configuration files are installed in /etc/init As I am unsure of what the correct solution might be I will leave this issue to the packager Have a nice day :-)

8 let, 6 měsíců

2
1
0 0

Re: PHP API

by Agustin Sacramento

Hi! The better way for us was made a Django ApiRest for our front based in PHP Synfony2. You can import fred-client lib and use it into your ApiRest. Best regards, Agustin Sacramento -----Original Message----- From: fred-users [mailto:fred-users-bounces@lists.nic.cz] On Behalf Of Jaromir Talir Sent: Friday, November 11, 2016 13:34 To: A mailing list for users and developers of FRED registry system Subject: Re: PHP API Hi, there is nothing I'd know about for immediate use. It would be great if somebody from community of users would make it. We don't have PHP programmers in our company. Regards, Jaromir On Sun, 2016-11-06 at 14:12 +0200, Mark Elkins wrote: > Better still - open sourced, readable and commented code of an API > written in PHP. > > On 06/11/2016 13:14, Thiago Farina wrote: >> Is there a PHP API for the Python fred client? >> >> -- >> Thiago Farina > _______________________________________________ > fred-users mailing list > fred-users(a)lists.nic.cz > https://lists.nic.cz/cgi-bin/mailman/listinfo/fred-users -- Jaromir Talir Technicky partner / Technical Fellow ------------------------------------------- CZ.NIC, z.s.p.o. -- .cz domain registry Milesovska 5, 130 00 Praha 3, Czech Republicmailto:jaromir.talir@nic.cz http://nic.cz/ sip:jaromir.talir@nic.cz tel:+420.222745107 mob:+420.739632712 fax:+420.222745112 ------------------------------------------- _______________________________________________ fred-users mailing list fred-users(a)lists.nic.cz https://lists.nic.cz/cgi-bin/mailman/listinfo/fred-users

8 let, 8 měsíců

1
0
0 0

Quick question on Fred regarding Premium Domain Names

by Mark Elkins

I'm writing some words on my understanding of Premium Domain Names - and am not sure about FRED.... Quick question: Does FRED implement the code to specify that "these names" are premium names and therefore cost more. The Registrar also needs a slight EPP code modification in that they must provide the (expected) cost of the domain to the Registry - in order to confirm its premium status - and I guess - the correct cost. In order for the Registry to implement this, one might need to perhaps provide a file of "regular expressions" which if met - would imply the Domain Name is Premium... could even add a second column as the cost? eg . (to match one character) .. (to match two characters) ... (to match three characters) green ( and other "generic" names) blue sexy travel hotel* (hotel, hotels, hotel-bookings - etc) Perhaps - do people have a different understanding of "What is a Premium Domain Name" ? -- Mark James ELKINS - Posix Systems - (South) Africa mje(a)posix.co.za Tel: +27.128070590 Cell: +27.826010496 For fast, reliable, low cost Internet in ZA: https://ftth.posix.co.za

8 let, 8 měsíců

3
2
0 0

PHP API

by Thiago Farina

Is there a PHP API for the Python fred client? -- Thiago Farina

8 let, 8 měsíců

3
2
0 0

Two notes about keysets

by Mario Guerra

1. The update_domain source includes the keyset firld. which is correct: ----- self.epp.update_domain(get_domain.id.id.name, add_admin=None, rem_admin=None, chg={'nsset' : None, 'keyset' : keyset_id, 'registrant' : None, 'auth_info' : None}, val_ex_date=None, cltrid=None) ----- But the documentation does not. Checking https://fred.nic.cz/files/fred/fred.txt, we have this fragment ----- update_domain(self, name, add_admin=None, rem_admin=None, chg=None, val_ex_date=None, cltrid=None) DESCRIPTION: The EPP 'update_domain' command is used to update values in the domain. SYNTAX: update_domain name [other_options] OPTIONS: name (required) Domain name add_admin Administrative contact ID (unbounded list) rem_admin Administrative contact ID (unbounded list) chg Change values nsset NSSET ID registrant Registrant ID auth_info Password required by server to authorize the transfer val_ex_date Validation expires at cltrid Client transaction ID ----- 2. The DS generated from the DNSKEY included in keysets, only includes the algorithm 1 (SHA1) but not 2 (SHA256). Best. Mario

8 let, 8 měsíců

1
0
0 0

auth info database query - best practice for sending auth info to a registrar

by Dr Paulos B Nyirenda

We are now prepapring to transfer multiple domains from our 2R registry to registrars now on the 3R FRED registry for .mw domains. Could you please tell me the best database command for collecting the auth info for a domain Since there appears to be no bulk domain transfer facility in FRED my guess is that we need to run the database query repeatedly to collect domain & auth-info pairs that we can then pass on to the registrar. What is the current best practice for passing auth info details to a registrar? Regards, PC ====================== Dr Paulos B Nyirenda NIC.MW & .mw ccTLD http://www.registrar.mw

8 let, 9 měsíců

2
3
0 0

auth info database query - best practice for sending auth info to a registrar

by Dr Paulos Nyirenda

We are now prepapring to transfer multiple domains from our 2R registry to registrars now on the 3R FRED registry for .mw domains. Could you please tell me the best database command for collecting the auth info for a domain Since there appears to be no bulk domain transfer facility in FRED my guess is that we need to run the database query repeatedly to collect domain & auth-info pairs that we can then pass on to the registrar. What is the current best practice for passing auth info details to a registrar? Regards, PC ====================== Dr Paulos B Nyirenda NIC.MW & .mw ccTLD http://www.registrar.mw ---------------------------------------------------------- Malawi SDNP Webmail: http://www.sdnp.org.mw Access your Malawi SDNP e-mail from anywhere in the world. ----------------------------------------------------------

8 let, 9 měsíců

1
0
0 0

domain transfers in FRED - how to charge the transaction

by Dr Paulos B Nyirenda

Jaromir, all, Our FRED registry 3R operation is going well enough that we can now move on to tackle issues on domain transfers and I have one or two questions with the following understanding that I have:. 1. My understanding is that: Once auth_info has been sent from current owner A to new owner B for domain dA.mw then B can do the transfer, such as using fred-client command: transfer_domain dA.mw auth_info_A [other_options] Is this correct? what are the other options? 2. A WHOIS query for dA.mw will then list new registrar: B 3. System then generates new auth_info_B and assigns it under registrar B ... right ? 4. How can the registry charge for the transfer of the domain dA.mw? 5. What needs to be configured in FRED to charge for domain transfers like this one? 6. If this FRED config can be done using fred-admin then please show syntax for trhe fred-admin command to configure charging for domain transfers. 7. If there a similar arrangement for transfering other objects like contacts and/or nssets? Regards, Paulos ====================== Dr Paulos B Nyirenda NIC.MW & .mw ccTLD http://www.registrar.mw ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2016.0.7752 / Virus Database: 4649/12929 - Release Date: 09/01/16 ------- End of forwarded message -------

8 let, 10 měsíců

2
4
0 0

EPP Testbed

by Thiago Farina

Hi, I'm using https://github.com/metaregistrar/php-epp-client as the EPP client. For being able to use it I need to feel some parameters in settings.ini: interface=eppConnection hostname=ssl://epp.demo.fred.nic.cz port=xxxxxx userid=xxxxxxxx password=xxxxxxxxx Which port, userid and password should I use to connect to Fred? Is it possible to use certificates from https://letsencrypt.org/? Thanks, -- Thiago Farina

8 let, 10 měsíců

3
3
0 0

Re: Assistantce in setting up FRED

by Stanford Mings

Hello Piotr, LOL... Just about everything. The gTLD is currently on CoCCA and want to move to a different system. On Fri, Sep 2, 2016 at 9:15 AM, Piotr Przybył <piotr(a)przybyl.org> wrote: > On 02/09/16 15:07, Stanford Mings wrote: > > Hello All, > > > > I am working with a gTLD and would like to get some assistance in using > FRED. I have the system up > > on a VM in my lab and can access it via the web-admin and the > fred-client CLI. > > > > Any assistance would be greatly appreciated. > > > > - Stanford Mings > > Hello Standord > > "What can I do you for?" ;-) > > Are you interested in FRED's features, configuration, ...? > > Best regards > Piotr > > _______________________________________________ > fred-users mailing list > fred-users(a)lists.nic.cz > https://lists.nic.cz/cgi-bin/mailman/listinfo/fred-users >

8 let, 10 měsíců

2
1
0 0

Assistantce in setting up FRED

by Stanford Mings

Hello All, I am working with a gTLD and would like to get some assistance in using FRED. I have the system up on a VM in my lab and can access it via the web-admin and the fred-client CLI. Any assistance would be greatly appreciated. - Stanford Mings

8 let, 10 měsíců

2
1
0 0

Invitation à rejoindre Cloud Openstack Abidjan

by Ousmane Sanogo

Cloud Openstack Abidjan Rejoignez Ousmane Sanogo et 2 autres Membres à Abidjan. Soyez le premier à être informé des prochains Meetups. Ce groupe s'adresse à tous ceux qui sont intéressés par le Cloud libre avec Openstack , Utilisateurs et developpeurs dans le monde de l’open-source. L'objectif du groupe est créer une communauté autou... -------------------------------------- Accepter l'invitation https://secure.meetup.com/n/?s=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJkZXN… -------------------------------------- ------- Message envoyé par Meetup de la part de Ousmane Sanogo (https://www.meetup.com/Cloud-Openstack-Abidjan/members/212092234/) depuis Cloud Openstack Abidjan. Une question? Vous pouvez contacter le support Meetup via support(a)meetup.com Je ne souhaite plus recevoir ce type d'e-mail (https://secure.meetup.com/n/?s=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJob29…) Meetup Inc. (https://www.meetup.com/), POB 4668 #37895 New York NY USA 10163

8 let, 10 měsíců

1
0
0 0

*****SPAM***** HELP modifying TTL in genzone-client generated zones

by Dr Paulos Nyirenda

Spam detection software, running on the system "mail.nic.cz", has identified this incoming email as possible spam. The original message has been attached to this so you can view it or label similar future email. If you have any questions, see the administrator of that system for details. Content preview: Help, We need to modify some SOA paramenters in zones that are generated by genzone-client like reduce the TTL since we are now generating the zone more frequently by cron job. fred-admin which we use to create zones does not seem to have a feature to midify a zone like this [...] Content analysis details: (5.5 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- 1.4 RCVD_IN_BRBL_LASTEXT RBL: No description available. [41.77.11.211 listed in bb.barracudacentral.org] -0.2 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain 1.5 BAYES_50 BODY: Bayes spam probability is 40 to 60% [score: 0.4839] 1.0 KAM_LAZY_DOMAIN_SECURITY Sending domain does not have any anti-forgery methods 1.0 HK_NAME_DR No description available. 0.8 KAM_ASCII_DIVIDERS Spam that uses ascii formatting tricks

8 let, 10 měsíců

3
2
0 0

database migration questions

by Piotr Przybył

Hello cz.nic Team I have a few questions related to database migration of FRED if you don't mind. ==== When trying to download the latest sources from https://fred.nic.cz/page/2904/download/#source I've realised, that they're not available. E.g. the latest migration scripts are available in fred-db*deb, but the tarball is not a corresponding one. Could you please try to release latest sources in tarballs? ==== I've noticed, that upgrade to 2.19.0 creates a table object_state_backup. However, beside DDL from 2.18.0-2.19.0.sql I don't see this table being used anywhere else. Can it be deleted? ==== Could you briefly describe what's the purpose of tables: contact_address contact_address_history As far I can tell after analysing the sources, these tables are populated by a functionality called from MojeID ( =your special NIC registrar to keep domain contacts defined at central level, not each registrar's level). ==== What are the following tables for? Or: How the checks of contacts are working? Is is something related to checking if a contact's address fields are valid? contact_check contact_check_history contact_check_message_map contact_check_object_state_request_map contact_check_poll_message_map contact_test_result contact_test_result_history contact_testsuite_map enum_contact_check_status enum_contact_check_status_localization enum_contact_test enum_contact_test_localization enum_contact_test_status enum_contact_test_status_localization enum_contact_testsuite enum_contact_testsuite_localization ==== There's a table notification_queue. I can't find any usage of it (maybe because not all tarballs are up to date). What is it for? Do you replicate this table using Slony? (Because it has neither primary nor unique key.) Best regards Piotr

8 let, 10 měsíců

2
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

fred-users