Hi,
We would like to run an ENUM registry for several companies to use to
provide lookups for their customers. The registry would store the
service provider gateway addresses.
I would like to ask a couple of questions.
We have been introduced to the Austrian ENUM server software, but it
appears to be very hard to install and does not support ubuntu server.
Does FRED do the same things as the Austrian software?
We found during a test that Cisco devices do not support the latest ENUM
RFC and we had to use an ENUM proxy to translate back to the old RFC.
Does FRED overcome this issue with Cisco gateway ENUM lookups?
We want to use a private domain for the registrations: domain.com
Does Fred permit the use of a private domain tree or must we use
e164.arpa?
Regards
mark
We would like to separate files for different subzones. Two possible
strategies:
1. Some option from genzone_client using an only zone.
2. Defining zones in FRED .cr, .ac.cr, .co.cr and the like (notice the
second-level zone).
Any thoughts?.
Best regards.
FRED installation using Ubuntu 9.04 (Jaunty) is very similar to an 8.04
installation.
There was one problem, though, with tinyerp-server, it fails. I
apparently solved that with this trick:
cp /usr/lib/python2.6/dist-packages/oldxml/_xmlplus/utils/boolean.so
/usr/lib/python2.6/dist-packages/_xmlplus/utils/
So it seems that everything is OK now.
BTW, I guess that future versions will use OpenERP which is TinyERP
succesor.....
Best regards.
in Fred there is a Whois service at this address:
http://localhost/whois
I would like to use this one on our website.
How/where can i edit the design of this page (content, fonts, fields etc.) ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hello
On DEBIAN:
I sorry I came in the morning and want to connect with fred-client.
It turn back error:
> login REG-FRED_A passwd
Used socket type: IPv4.
Socket timeout: 10.0 sec.
Connecting to localhost, port 700 ...
Connection established.
Try to open SSL layer...
ERROR: I cannot connect to the server localhost.
Connection socket.error: (111, 'Connection refused') (localhost:700)
It worked normally yesterday.
On UBUNTU:
I have these errors when trying to run fred-client :
d# /usr/local/bin/fred-client
FredClient 2.1.2
Type "help", "license" or "credits" for more information.
Using configuration from /root/.fred-client.conf
Used socket type: IPv4.
Socket timeout: 10.0 sec.
Connecting to localhost, port 700 ...
Connection established.
Try to open SSL layer...
ERROR: socket.sslerror: (1, 'error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol') (localhost:700)
Certificate not signed by verified certificate authority.
Hello
I've all servers runing on DEBIAN but I can't login with the default registrars :
root@nic:/home/nic# /usr/local/bin/fred-client
FredClient 2.1.2
Type "help", "license" or "credits" for more information.
Using configuration from /usr/local/etc/fred/fred-client.conf
> login REG-FRED_A passwd
Used socket type: IPv4.
Socket timeout: 10.0 sec.
Connecting to localhost, port 700 ...
Connection established.
Try to open SSL layer...
ERROR: I cannot connect to the server localhost.
Connection socket.error: (111, 'Connection refused') (localhost:700)
Hello sir
I very much sorry
You wrote to me :
"Sorry, but I don't understand what configure script you are trying to
call. If you will install omniorb normal way (apt-get install omniidl4
omniidl4-python libomniorb4-dev libomnithread3-dev', you should not have
aby such problems."
I've install all mentioned on M GUERRA before install FRED.
Do you remember when I had problem with fred-pyfred (witch not started) on DEBIAN and when I used fred-manager for install.
I had solved this with installing omniORBpy and fred-pyfred started.
So I think that I can solve this same problem on Ubuntu with omniORBpy installation.
Only fred-pyfred server don't start on UBUNTU.
On DEBIAN I have to delete FRED database for restarting servers otherwise it stop on PostgreSQL interface.
hello sir I´m sorry again
I´ve install FRED on Ubuntu server 8.04
Only fred-pyfred server don´t start I´ve solve this in Debian by installing omniORBpy but on Ubuntu
it sent back went I execute configure command:
configure error : You must specify the omniORB root directory
it´s withoption --with-omniorb but I have try the directories.
/usr/share/pyshared/omniORB,
/usr/lib/python2.5/sitres-packages/onmiORB.
but it don´t works.
I´ve already install omniORb-4.1.3
I´ve copy fred-server in /etc/init.d/ and do update-rc.d fred-server defaults.
Servers didn´t start when I reboot the computer, I have always to start them manualy.
REG-FO@localhost> poll req
Command completed successfully; ack to dequeue
Queue size: 1
Message ID: 142
Message date: 2009-05-04T16:16:19+01:00
Message content:
[nsset:testData]:
[ATTR: xmlns:nsset: http://www.nic.cz/xml/epp/nsset-1.2; xsi:schemaLocation: http://www.nic.cz/xml/epp/nsset-1.2 nsset-1.2.xsd]
[nsset:id]: NS437
[nsset:name]: 'olivant.fo'
[nsset:result]:
[nsset:testname]: glue_ok
[nsset:status]: false
Above you can see my problem.
My question is:
How do i register glue-records with FRED ?
The domain above uses nameservers ns1.olivant.fo and ns2.olivant.fo for the domain olivant.fo
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
When i use the poll req command, i get this result:
Queue size [msgQ.count]: 1
Message ID [msgQ.id]: 143
Message date [qDate]: 2009-05-04T18:22:14+01:00
Message content [msg]:
[nsset:testData]:
[ATTR: xmlns:nsset: http://www.nic.cz/xml/epp/nsset-1.2; xsi:schemaLocation: http://www.nic.cz/xml/epp/nsset-1.2 nsset-1.2.xsd]
[nsset:id]: NS437
[nsset:name]: 'balslev.fo'
[nsset:result]:
[nsset:testname]: glue_ok
[nsset:status]: true
[nsset:testname]: existence
[nsset:status]: true
[nsset:testname]: presence
[nsset:status]: true
[nsset:testname]: authoritative
[nsset:status]: true
But how can i access for example [nsset:status] programmatically. I have tried my best, but i dont know how to do it. Im using PHP. I thought it should be something like:
$fred_data['msg'][nsset:status][0]
But i cant find out the right syntax.
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Salut
Bon je voulais installer omniORBpy-3.3 sur UBUNTU server 8.04
Mais si j´execute la commande configure il me renvoie:
configure errror: You must specify the omniORB root directory
Je sais que c´est l´option --with-omniorb qu´il faud utiliser mais quel repertoire donner.
J´ai essayé : /usr/share/pyshared/omniORB,
/usr/lib/python2.5/sitres-packages/onmiORB.
Mais ca passe pas
Y´a-t-il une librairie à installer avant d´installer omniORBpy ou non ?
J´ai dèjà installé omniORb-4.1.3
I want install omniORBpy-3.3 on ubuntu server
When I do ./configure it say:
checking for omniORM root ... no
configure: error :You must specify the omniORB root directory
how to specify it ?
when I do find -name omniORB I have:
/usr/share/pyshare/omniORB
/usr/lib/python2.5/site-packages/omniORB
/home/fred/fred-tools/omniORBpy-3.3/python/omniORB
witch ake as root directory ?
We are now testing FRED in earnest and adapting our web application to it.
We would like to massively delete test contacts without waiting for the
protection period. How could that be done short of making a backup of
the BD first and then restoring?.
BTW, how can I change the protection period?.
Best regards.
Mario Guerra
I configured the latest FRED for the upcoming Ubuntu 9.04. Basically the
same than FRED for Hardy. One strange thing, though.
tinyerp-server does not install well. Not a FRED problem, but a
packaging or so problem when generating the corresponding .deb. I filed
a Launchpad bug and got the former tinyerp-server (for Hardy).
I documented the process. I'm sending the translated version to Jaromír
in these days.
Saludos.
I have 2 questions about fred-client command "technical_test".
In the documentation i read this:
"The result of the test will be saved into the message queue from where the registrant can fetch it by poll command."
My questions are:
1) Is the result of the test also saved in some of the postgresql tables ?
2) If the result isnt saved in the database, and i cant check the result from the database, then how do i use the poll command to see the result ?
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hello folks,
We would need to update the removal period from 15 days to 2 months -
this corresponds more to our concerns.
By diggin into the configuration we foud that data was storred in the
DB and that executing this command should do the trick:
update enum_parameters set val = '60' where id = 6;
Can you please confirm that?
Do we have any more action to take?
Thanks for your support.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Gregober ---> PGP ID --> 0x1BA3C2FD
bsd @at@ todoo.biz
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
P "Please consider your environmental responsibility before printing
this e-mail"
Hi.
I am trying to Install FRED but I am having many problems.
I tried the way:
./fred-manager download
./fred-manager install
./fred-manager start
and it gets the errors below:
root@ns1:~/test# ./fred-manager install
initdb: cannot be run as root
Please log in (using, e.g., "su") as the (unprivileged) user that will
own the server process.
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for a sed that does not truncate output... /bin/sed
checking for /home/sysdns/test/root/nofred/pg... no
configure: error: Directory "/home/sysdns/test/root/nofred/pg" does not exists (use --with-pghbadir)
Than I have used the other options, by adding the following source in the source.lists
deb http://archive.nic.cz/ dapper/
Than when I do apt-get install fred-* it shows the line below:
root@ns1:~/test# apt-get install fred-*
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package fred-manager
Can someone help in the process for Installing fred because I think I am stuck and I don't know what to do??
Thanks a lot
Adriatik
In our system (regarding Contacts) we need 2 fields:
Nationality
Country
but FRED only uses Country.
Is there any place to save both these informations ?
(This is not very important to me, i also send this as information.)
regards
Petur
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
hello
1--I´ve finished to install FRED on DEBIAN 5.0 with downloadind and compiling sources as at download page
But when I want to start servers with ./fred-server start it take away to postgres interface and stay there:
postgres#
2--Also fred-dbmanager execution took to the postgres interface
3--I´ve create FRED database and use ordered.sql to create tables
and when I do ./fred-dbmanager it say fFRED database don´t exist or postgres server isn´t running
Or postgres is online and I have create the database
can you give help to pass this step ?
I have put my documentation notes about installing FRED in
http://www.guerra.co.cr/FRED/notasfredj-en.pdf
Please feel free to comment about them.
I hope this is useful.
Regards.
Mario A. Guerra
NIC - Costa Rica
REG-FO@localhost> renew_domain hus.fo 2009-12-04 (6 m)
Do you really want to send this command to the server? (y/N): y
ERROR: Parameter value policy error
Reason: period is not aligned with allowed step.
Is it possible to allow this ? and how ?
This email and its attachments may be confidential and are intended solely for the use of the individual to whom it is addressed.
If you are not the intended recipient or authorized to receive information for the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If the email contains proposals, they are valid for 30 days following the date of email transmission. Finally, the recipient should check this email and any attachment for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by email.
Hello sir
I'me testing FRED. With administrative
interface I've create a registrar I can search it but when I verify the
table registrar in databse I don't see it. Why ?
When I execute creation commands, after typing command conection "fred-client -h nic -p 22353 -u REG-FRED_A -w passwd, in console"
It sent after I fill up fields :
Interactive input completed. [Press Enter]
I press ENTER
It sent back error like :
You are not connected.
ERROR: Command data XML document failed to validate.
More details in verbose 2 or higher.
If I open ./nofred/named/cron.log there is line error:
File "/home/nic/root/lib/python2.5/site-packages/pyfred/zone.py",
line 174, in getObject
raise ZoneException("Is nameservice running? (%s)" % e)
pyfred.zone.ZoneException: Is nameservice running? (CORBA.TRANSIENT(omniORB.TRANSIENT_ConnectFailed, CORBA.COMPLETED_NO))
T
Is this the problem ?
have I to modify some configuration files ?
how to connect for executing commands (creating contact, registrar, domaine.... etc) ?
thank you
